| TEST DATA DOCUMENT | 89305-40001-1202-01 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| UNDERCUT DIAMETER | 0.975 INCHES MAXIMUM |
| UNDERCUT WIDTH | 0.0570 INCHES MINIMUM |
| EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 345.0 NOMINAL |
| ELECTRICAL RESISTANCE PER SECTION | 10.000 KILOHMS SINGLE SECTION |
| ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION |
| ACTUATOR TYPE | SINGLE SHAFT |
| AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 70.0 SINGLE SECTION |
| AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 125.0 SINGLE SECTION |
| BODY DIAMETER | 1.073 INCHES MAXIMUM |
| BODY LENGTH | 0.630 INCHES MAXIMUM |
| BODY STYLE | CYLINDRICAL SERVO MOUNTED |
| FIXED TAP QUANTITY PER SECTION | 1 SINGLE SECTION |
| FUNCTION CHARACTERISTIC PER SECTION | SINGLE SECTION LINEAR |
| FUNCTION CONFORMITY PER SECTION | SINGLE SECTION ABSOLUTE LINEARITY |
| FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.087 TO 0.087 SINGLE SECTION |
| LATERAL RUNOUT | 0.0005 INCHES |
| PILOT DIAMETER | 0.9685 INCHES MINIMUM AND 0.9688 INCHES MAXIMUM |
| PILOT LENGTH | 0.0620 INCHES NOMINAL |
| PILOT DIAMETER RUNOUT | 0.00050 INCHES |
| POWER DISSIPATION RATING PER SECTION IN WATTS | 1.0 FREE AIR SINGLE SECTION |
| PROPRIETARY CHARACTERISTICS | PACS |
| MAXIMUM RUNNING TORQUE | 0.35 INCH-OUNCES |
| MAXIMUM STARTING TORQUE | 0.35 INCH-OUNCES |
| MECHANICAL BACKLASH IN DEG ANGULAR ROTATION | 0.05 |
| MOUNTING LIP DEPTH | 0.0620 INCHES NOMINAL |
| MOUNTING LIP DIAMETER | 1.0730 INCHES MAXIMUM |
| MOUNTING METHOD | CLAMP RING |
| OVERALL DIAMETER | 1.344 INCHES MAXIMUM |
| OVERALL LENGTH | 1.160 INCHES MAXIMUM |
| RELIABILITY INDICATOR | NOT ESTABLISHED |
| RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0 TO 10.0 SINGLE SECTION |
| ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 360.0 NOMINAL |
| SECTION QUANTITY | 1 |
| SHAFT BEARING TYPE | BALL |
| SHAFT END PLAY | 0.00500 INCHES |
| SHAFT DIAMETER | 0.1245 INCHES MINIMUM AND 0.1247 INCHES MAXIMUM |
| SHAFT LENGTH | 0.500 INCHES NOMINAL |
| SHAFT RADIAL PLAY | 0.001 INCHES |
| SHAFT RUNOUT | 0.001 INCHES |
| SHAFT STYLE | ROUND |
| TAP LOCATION TOLERANCE PER SECTION | -17.25 TO 17.25 DEG ANGULAR ROTATION SINGLE SECTION |
| TAP LOCATION FROM CCW TERMINAL PER SECTION IN DEG OF EFFECTIVE ELECTRICAL ROTATION | 172.5 SINGLE SECTION |
| TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -100.0 TO 100.0 SINGLE SECTION |
| TERMINAL LOCATION | RADIALLY POSITIONED OVER MORE THAN HALF THE CIRCUMFERENCE |
| TERMINAL TYPE AND QUANTITY | 4 TURRET |