|
|
|
National Stock Number:
5905-01-224-9585
Federal Supply Class:
5905
National Item Identification Number:
012249585
Description:
RESISTOR,VARIABLE,NONWIRE WOUND,
Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus or minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.
|
Manufacturer Information:
| 509189-1 | 31550 | L3HARRIS TECHNOLOGIES, INC. | | A3012866-1 | 12697 | CLAROSTAT SENSORS AND CONTROLS | | A3012866-2 | 31550 | L3HARRIS TECHNOLOGIES, INC. | | A3012866-1 | 80063 | US ARMY COMMUNICATIONS & ELECTRONICS MATERIEL READINESS COMMAND LOGISTICS ENGINEERING DIR |
|
Techincal Specification:
| EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 360.0 NOMINAL | | ELECTRICAL RESISTANCE PER SECTION | 10.0 KILOHMS SINGLE SECTION | | ACTUATOR TRAVEL CONTROL FEATURE | STOPS | | ACTUATOR TYPE | SINGLE SHAFT | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 70.0 SINGLE SECTION | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 120.0 SINGLE SECTION | | BODY HEIGHT | 0.500 INCHES NOMINAL | | BODY LENGTH | 0.875 INCHES MAXIMUM | | BODY STYLE | RECTANGULAR W/BUSHING | | BODY WIDTH | 0.500 INCHES NOMINAL | | CUBIC MEASURE | 0.218 CUBIC INCHES | | FEATURES PROVIDED | PANEL SEAL AND SHAFT SEAL AND SWITCH | | FIRST FLAT LENGTH | 0.250 INCHES NOMINAL | | FLAT HEIGHT | 0.219 INCHES NOMINAL | | FRAGILITY FACTOR | MODERATELY RUGGED | | OVERALL LENGTH | 1.896 INCHES NOMINAL | | MAXIMUM RUNNING TORQUE | 3.00 INCH-OUNCES | | MAXIMUM STARTING TORQUE | 3.00 INCH-OUNCES | | MAXIMUM STOP TORQUE | 48.00 INCH-OUNCES | | MOUNTING BUSHING LENGTH | 0.350 INCHES MINIMUM AND 0.385 INCHES MAXIMUM | | MOUNTING METHOD | STANDARD BUSHING | | OPERATING POSITION | ANY POSITION OF ROTATIONAL TRAVEL | | POWER DISSIPATION RATING PER SECTION IN WATTS | 0.25 FREE AIR SINGLE SECTION | | RELIABILITY INDICATOR | NOT ESTABLISHED | | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0 TO 10.0 SINGLE SECTION | | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 360.0 NOMINAL | | SCREW THREAD DIAMETER | 0.375 INCHES NOMINAL | | SCREW THREAD QUANTITY PER INCH | 32.0 | | SCREW THREAD SERIES DESIGNATOR | UNEF | | SECTION QUANTITY | 1 | | SHAFT DIAMETER | 0.248 INCHES MINIMUM AND 0.251 INCHES MAXIMUM | | SHAFT BEARING TYPE | SLEEVE | | SHAFT LENGTH | 0.834 INCHES MINIMUM AND 0.896 INCHES MAXIMUM | | SHAFT STYLE | ROUND, FLATTED | | SWITCH CONTACT ARRANGEMENT | DOUBLE POLE, SINGLE THROW, ONE OPEN, ONE CLOSED | | SWITCH CURRENT TYPE AND RATING IN AMPS | 0.250 AC | | SWITCH TYPE | PUSH-PULL | | SWITCH VOLTAGE RATING IN VOLTS | 30.0 | | TERMINAL LOCATION | RIGHT-LEFT ADJACENT SIDES | | TERMINAL TYPE AND QUANTITY | 7 TAB, SOLDER LUG | | TEST DATA DOCUMENT | 80063-A3012866 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
|
|