| ELECTRICAL RESISTANCE | 20.000 KILOHMS 4TH INTERMEDIATE RESISTANCE VALUE |
| ELECTRICAL RESISTANCE | 100.000 KILOHMS HIGHEST RESISTANCE VALUE |
| ELECTRICAL RESISTANCE | 15.300 KILOHMS 3RD INTERMEDIATE RESISTANCE VALUE |
| ELECTRICAL RESISTANCE | 7.950 KILOHMS LOWEST RESISTANCE VALUE |
| ELECTRICAL RESISTANCE | 8.400 KILOHMS 1ST INTERMEDIATE RESISTANCE VALUE |
| ELECTRICAL RESISTANCE | 8.910 KILOHMS 2ND INTERMEDIATE RESISTANCE VALUE |
| AMBIENT TEMP IN DEG CELSIUS AT FULL RATED POWER | 70.0 |
| AMBIENT TEMP IN DEG CELSIUS AT ZERO PERCENT RATED POWER | 150.0 |
| BODY HEIGHT | 0.200 INCHES MAXIMUM |
| BODY LENGTH | 0.990 INCHES NOMINAL |
| BODY WIDTH | 0.100 INCHES MAXIMUM |
| CUBIC MEASURE | 0.0198 CUBIC INCHES |
| IDENTICAL VALUE RESISTOR QUANTITY | 1 1ST INTERMEDIATE RESISTANCE VALUE |
| IDENTICAL VALUE RESISTOR QUANTITY | 1 3RD INTERMEDIATE RESISTANCE VALUE |
| IDENTICAL VALUE RESISTOR QUANTITY | 1 4TH INTERMEDIATE RESISTANCE VALUE |
| IDENTICAL VALUE RESISTOR QUANTITY | 1 HIGHEST RESISTANCE VALUE |
| IDENTICAL VALUE RESISTOR QUANTITY | 2 2ND INTERMEDIATE RESISTANCE VALUE |
| IDENTICAL VALUE RESISTOR QUANTITY | 2 LOWEST RESISTANCE VALUE |
| INCLOSURE METHOD | ENCAPSULATED |
| POWER DISSIPATION RATING IN WATTS | 0.125 TOTAL NETWORK |
| RELIABILITY INDICATOR | NOT ESTABLISHED |
| RESISTANCE TOLERANCE IN PERCENT | -1.000 TO 1.000 EACH RESISTOR |
| STYLE DESIGNATOR | SINGLE INLINE |
| SPECIAL FEATURES | TEMPERATURE COEFFICIENT FOR 7.95K RESISTOR IS 100 PPM,REMAINING RESISTORS 50 PPM |
| TERMINAL LENGTH | 0.125 INCHES MINIMUM |
| TERMINAL QUANTITY | 10 |
| TERMINAL TYPE | PIN |
| TEST DATA DOCUMENT | 80063-A3012861 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |