| AMBIENT TEMP IN DEG CELSIUS AT ZERO PERCENT RATED POWER | 150.0 |
| BODY HEIGHT | 0.200 INCHES MAXIMUM |
| BODY LENGTH | 0.690 INCHES NOMINAL |
| BODY WIDTH | 0.100 INCHES MAXIMUM |
| IDENTICAL VALUE RESISTOR QUANTITY | 1 1ST INTERMEDIATE RESISTANCE VALUE |
| IDENTICAL VALUE RESISTOR QUANTITY | 1 HIGHEST RESISTANCE VALUE |
| IDENTICAL VALUE RESISTOR QUANTITY | 1 LOWEST RESISTANCE VALUE |
| IDENTICAL VALUE RESISTOR QUANTITY | 2 2ND INTERMEDIATE RESISTANCE VALUE |
| INCLOSURE METHOD | ENCAPSULATED |
| POWER DISSIPATION RATING IN WATTS | 0.125 TOTAL NETWORK |
| PROPRIETARY CHARACTERISTICS | PACS |
| RELIABILITY INDICATOR | NOT ESTABLISHED |
| RESISTANCE TOLERANCE IN PERCENT | -3.000 TO 3.000 EACH RESISTOR |
| SCHEMATIC DIAGRAM DESIGNATOR | BALANCED LADDER NETWORK |
| STYLE DESIGNATOR | SINGLE INLINE |
| TEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS | -200.0 TO 200.0 |
| TEMP RANGE OF TEMP COEFFICIENT IN DEG CELSIUS | -55.0 TO 150.0 |
| TERMINAL LENGTH | 0.125 INCHES MINIMUM |
| TERMINAL QUANTITY | 7 |
| TERMINAL TYPE | PIN |
| TEST DATA DOCUMENT | 80063-A3012858 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| ELECTRICAL RESISTANCE | 10.000 KILOHMS 2ND INTERMEDIATE RESISTANCE VALUE |
| ELECTRICAL RESISTANCE | 2.700 KILOHMS 1ST INTERMEDIATE RESISTANCE VALUE |
| ELECTRICAL RESISTANCE | 20.000 KILOHMS HIGHEST RESISTANCE VALUE |
| ELECTRICAL RESISTANCE | 51.000 OHMS LOWEST RESISTANCE VALUE |
| AMBIENT TEMP IN DEG CELSIUS AT FULL RATED POWER | 70.0 |