|
|
|
National Stock Number:
5905-01-230-6482
Federal Supply Class:
5905
National Item Identification Number:
012306482
Description:
RESISTOR NETWORK,FIXED,FILM
Detail:
An arrangement of multiple fixed resistive elements or discrete resistors permanently encased, encapsulated, or potted together, to form an inseparable unit. The resistive elements, consisting of a thin layer of conductive material deposited on or fused to an insulating base, usually are electrically connected to each other and may be arranged in any circuit configuration. Excludes RESISTOR, FIXED (as modified); RESISTOR ASSEMBLY; RESISTOR NETWORK, FIXED-VARIABLE; and RESISTOR SET, MATCHED.
|
Manufacturer Information:
| 10127750 | A486G | NIMIKKEISTOKESKUS NCB FINLAND | | 8989HY-04-1001-J | 57027 | INTERNATIONAL RESISTIVE COMPANY OF TEXAS, LLC | | 955230-5B | 82577 | RAYTHEON COMPANY | | DFP14-01-102J-S19 | 91637 | VISHAY DALE ELECTRONICS, LLC |
|
Techincal Specification:
| ELECTRICAL RESISTANCE | 1.000 KILOHMS EACH RESISTOR | | AMBIENT TEMP IN DEG CELSIUS AT FULL RATED POWER | 70.0 | | AMBIENT TEMP IN DEG CELSIUS AT ZERO PERCENT RATED POWER | 125.0 | | BODY HEIGHT | 0.075 INCHES MAXIMUM | | BODY LENGTH | 0.265 INCHES MAXIMUM | | BODY WIDTH | 0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM | | IDENTICAL VALUE RESISTOR QUANTITY | 7 EACH RESISTOR | | INCLOSURE METHOD | ENCAPSULATED | | POWER DISSIPATION RATING IN WATTS | 0.350 TOTAL NETWORK | | RELIABILITY INDICATOR | NOT ESTABLISHED | | RESISTANCE TOLERANCE IN PERCENT | -5.000 TO 5.000 EACH RESISTOR | | SCHEMATIC DIAGRAM DESIGNATOR | ISOLATED ARRAY | | STYLE DESIGNATOR | FLAT PACK | | TEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS | -300.0 TO 300.0 FIRST TEMP COEFFICIENT | | TEMP RANGE OF TEMP COEFFICIENT IN DEG CELSIUS | -55.0 TO 125.0 TEMP RANGE OF FIRST TEMP COEFFICIENT | | TERMINAL LENGTH | 0.280 INCHES MAXIMUM | | TERMINAL QUANTITY | 14 | | TERMINAL TYPE | PIN | | TEST DATA DOCUMENT | 82577-955230 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
|
|