|
|
|
National Stock Number:
5905-01-231-2451
Federal Supply Class:
5905
National Item Identification Number:
012312451
Description:
RESISTOR,FIXED,FILM
Detail:
A resistor whose ohmic value cannot be adjusted or varied. The resistance element consists of either a thin layer of conductive material, containing either binders or insulating materials, deposited on an insulated form; or an alloy of metal and ceramic materials, usually fused to an insulated form. Opposition to the flow of current is an inherent property of the materials used and is manifest by the heat dissipation in the resistor. See also ATTENUATOR, FIXED and RESISTOR, FIXED, COMPOSITION. Excludes carbon composition type resistors.
|
Manufacturer Information:
| CR12T2-100J | 24602 | SMITHS INTERCONNECT AMERICAS, INC. | | SM-A-955687-3 | 80063 | US ARMY COMMUNICATIONS & ELECTRONICS MATERIEL READINESS COMMAND LOGISTICS ENGINEERING DIR | | TCX0061J10J0 | 17826 | TECHNO COMPONENTS CORP DBA TECHNO COMPONENTS |
|
Techincal Specification:
| ELECTRICAL RESISTANCE | 10.000 OHMS | | AMBIENT TEMP AT FULL RATED POWER | 125.0 CELSIUS | | AMBIENT TEMP IN DEG CELSIUS AT ZERO PERCENT RATED POWER | 175.0 | | BODY HEIGHT | 0.018 INCHES MAXIMUM | | BODY LENGTH | 0.120 INCHES NOMINAL | | BODY WIDTH | 0.060 INCHES NOMINAL | | CUBIC MEASURE | 0.0007 CUBIC INCHES | | INCLOSURE TYPE | HERMETICALLY SEALED | | POWER DISSIPATION RATING IN WATTS | 0.125 FREE AIR | | PRECIOUS MATERIAL | GOLD | | PRECIOUS MATERIAL AND LOCATION | TERMINAL SURFACES GOLD | | RELIABILITY INDICATOR | NOT ESTABLISHED | | RESISTANCE TOLERANCE IN PERCENT | -5.000 TO 5.000 | | STYLE DESIGNATOR | TERMINAL EACH END | | TEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS | -100.0 TO 100.0 | | TEMP RANGE OF TEMP COEFFICIENT IN DEG CELSIUS | -55.0 TO 175.0 | | TERMINAL LENGTH | 0.250 INCHES MINIMUM | | TERMINAL TYPE | TERMINAL TYPE PER BODY STYLE | | TERMINAL WIDTH | 0.060 INCHES NOMINAL | | TEST DATA DOCUMENT | 80063-SM-A-955687 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) | | UNPACKAGED UNIT WEIGHT | 0.0007 GRAMS |
|
|