| ELECTRICAL RESISTANCE | 20.000 KILOHMS LOWEST RESISTANCE VALUE |
| 100.000 KILOHMS INTERMEDIATE RESISTANCE VALUE |
| 200.000 KILOHMS HIGHEST RESISTANCE VALUE |
| IDENTICAL VALUE RESISTOR QUANTITY | 2 LOWEST RESISTANCE VALUE |
| 3 INTERMEDIATE RESISTANCE VALUE |
| 2 HIGHEST RESISTANCE VALUE |
| RESISTANCE TOLERANCE IN PERCENT | -0.010 TO 0.010 EACH RESISTOR |
| POWER DISSIPATION RATING IN WATTS | 0.300 EACH RESISTOR |
| AMBIENT TEMP IN DEG CELSIUS AT FULL RATED POWER | 85.0 |
| AMBIENT TEMP IN DEG CELSIUS AT ZERO PERCENT RATED POWER | 145.0 |
| INCLOSURE METHOD | ENCAPSULATED |
| STYLE DESIGNATOR | DUAL INLINE |
| TERMINAL TYPE | PIN |
| TERMINAL QUANTITY | 14 |
| RELIABILITY INDICATOR | ESTABLISHED |
| TEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS | -1.0 TO 1.0 |
| CUBIC MEASURE | 0.099 CUBIC INCHES |
| TEMP RANGE OF TEMP COEFFICIENT IN DEG CELSIUS | -55.0 TO 145.0 |
| SCHEMATIC DIAGRAM DESIGNATOR | ISOLATED ARRAY |
| BODY LENGTH | 1.050 INCHES NOMINAL |
| BODY WIDTH | 0.295 INCHES NOMINAL |
| BODY HEIGHT | 0.320 INCHES NOMINAL |
| RELIABILITY FAILURE RATE LEVEL IN PERCENT | 0.0011 |
| TERMINAL LENGTH | 1.000 INCHES MINIMUM |
| TEST DATA DOCUMENT | 23094-20443 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |