|
|
|
National Stock Number:
5905-01-243-4014
Federal Supply Class:
5905
National Item Identification Number:
012434014
Description:
RESISTOR,FIXED,FILM
Detail:
A resistor whose ohmic value cannot be adjusted or varied. The resistance element consists of either a thin layer of conductive material, containing either binders or insulating materials, deposited on an insulated form; or an alloy of metal and ceramic materials, usually fused to an insulated form. Opposition to the flow of current is an inherent property of the materials used and is manifest by the heat dissipation in the resistor. See also ATTENUATOR, FIXED and RESISTOR, FIXED, COMPOSITION. Excludes carbon composition type resistors.
|
Manufacturer Information:
| 5529383-6 | 53711 | NAVAL SEA SYSTEMS COMMAND | | S555-19.44K | 18612 | VISHAY INTERTECHNOLOGY, INC. |
|
Techincal Specification:
| ELECTRICAL RESISTANCE | 19.440 KILOHMS | | AMBIENT TEMP AT FULL RATED POWER | 125.0 CELSIUS | | AMBIENT TEMP IN DEG CELSIUS AT ZERO PERCENT RATED POWER | 175.0 | | BODY HEIGHT | 0.320 INCHES NOMINAL | | BODY LENGTH | 0.295 INCHES NOMINAL | | BODY WIDTH | 0.100 INCHES NOMINAL | | CUBIC MEASURE | 0.010 CUBIC INCHES | | INCLOSURE TYPE | ENCAPSULATED | | POWER DISSIPATION RATING IN WATTS | 0.300 FREE AIR | | RELIABILITY INDICATOR | ESTABLISHED | | RELIABILITY FAILURE RATE LEVEL IN PERCENT | 1.000 | | RESISTANCE TOLERANCE IN PERCENT | -0.100 TO 0.100 | | SPECIAL FEATURES | BURN-IN REQUIRED | | UNPACKAGED UNIT WEIGHT | 1.0 GRAMS | | STYLE DESIGNATOR | TERMINALS ONE EDGE | | TEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS | -10.0 TO 10.0 SECOND TEMP COEFFICIENT | | TEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS | -5.0 TO 5.0 FIRST TEMP COEFFICIENT | | TEMP RANGE OF TEMP COEFFICIENT IN DEG CELSIUS | +125.0 TO 175.0 TEMP RANGE OF SECOND TEMP COEFFICIENT | | TEMP RANGE OF TEMP COEFFICIENT IN DEG CELSIUS | -55.0 TO 125.0 TEMP RANGE OF FIRST TEMP COEFFICIENT | | TERMINAL LENGTH | 0.875 INCHES MINIMUM | | TERMINAL TYPE | WIRE LEAD | | TEST DATA DOCUMENT | 53711-5529383 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
|
|