|
|
|
National Stock Number:
5905-01-259-3508
Federal Supply Class:
5905
National Item Identification Number:
012593508
Description:
RESISTOR,FIXED,WIRE WOUND,INDUCT
Detail:
INC 37403 REINSTATED ON 010303~A resistor whose ohmic value cannot be adjusted or varied. The resistance element consists of high resistance wire (or ribbon) either wound on an insulated form or constructed so as to be self-supporting. The item must have inherent characteristics of inducing self-inductance. Opposition to current flow is an inherent property of the resistance wire and is manifested by the heat dissipation in the resistor. Excludes SUPPRESSOR, IGNITION INTERFERENCE. See also RESISTOR (1), FIXED, WIRE WOUND, NONINDUCTIVE.
|
Manufacturer Information:
| 30003-704AS9325-2 | 91637 | VISHAY DALE ELECTRONICS, LLC | | 704AS9325-2 | 30003 | NAVAL AIR SYSTEMS COMMAND MANAGED ORIGINAL DESIGN ACTIVITY NOT MATERIAL/PARTS SUPPLIER | | 704AS9325-2 | 96214 | RAYTHEON COMPANY | | 899325-2 | 96214 | RAYTHEON COMPANY |
|
Techincal Specification:
| ELECTRICAL RESISTANCE | 0.010 OHMS | | AMBIENT TEMP AT FULL RATED POWER | 25.0 CELSIUS | | AMBIENT TEMP IN DEG CELSIUS AT ZERO PERCENT RATED POWER | 275.0 | | BODY HEIGHT | 0.400 INCHES MAXIMUM | | BODY LENGTH | 0.781 INCHES MAXIMUM | | BODY WIDTH | 0.435 INCHES MAXIMUM | | CUBIC MEASURE | 0.136 CUBIC INCHES | | DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH | 0.562 INCHES NOMINAL | | INCLOSURE TYPE | ENCASED | | MOUNTING HOLE SIZE | 0.116 INCHES NOMINAL | | POWER DISSIPATION RATING IN WATTS | 6.000 FREE AIR | | RELIABILITY INDICATOR | NOT ESTABLISHED | | RESISTANCE TOLERANCE IN PERCENT | -1.000 TO 1.000 | | STYLE DESIGNATOR | AXIAL TERMINAL (S) | | TEMP RANGE OF TEMP COEFFICIENT IN DEG CELSIUS | -55.0 TO 275.0 | | TEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS | -200.0 TO 200.0 | | TERMINAL LENGTH | 0.250 INCHES MINIMUM | | TERMINAL TYPE | TAB, SOLDER LUG | | TERMINAL WIDTH | 0.140 INCHES MINIMUM | | TEST DATA DOCUMENT | 30003-704AS9325-2 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) | | UNPACKAGED UNIT WEIGHT | 8.0 GRAMS |
|
|