| ZERO POWER RESISTANCE | 3.000 KILOHMS |
| ZERO POWER RESISTANCE TOLERANCE IN PERCENT AT REFERENCE TEMP | -5.0 TO 5.0 |
| INCLOSURE TYPE | ENCAPSULATED |
| RELIABILITY INDICATOR | NOT ESTABLISHED |
| STYLE DESIGNATOR | DISK |
| TERMINAL TYPE AND QUANTITY | 2 WIRE LEAD |
| SURFACE TREATMENT | COPPER AND |
| TIN TERMINAL |
| MAXIMUM POWER DISSIPATION RATING | 500.00 MILLIWATTS |
| AMBIENT TEMP AT FULL RATED POWER | 25.0 DEG CELSIUS |
| MAXIMUM OPERATING TEMP | 125.0 DEG CELSIUS |
| THERMAL TIME CONSTANT IN SECONDS | 80.0 |
| POWER DISSIPATION CONSTANT IN MILLIWATTS PER DEG CELSIUS | 5.0 |
| TEMP POINTS FOR RESISTANCE READINGS AT ZERO POWER | -55.0 DEG CELSIUS 1ST RESISTANCE-TEMPERATURE POINT |
| -15.0 DEG CELSIUS 2ND RESISTANCE-TEMPERATURE POINT |
| 0.0 DEG CELSIUS 3RD RESISTANCE-TEMPERATURE POINT |
| 50.0 DEG CELSIUS 4TH RESISTANCE-TEMPERATURE POINT |
| 75.0 DEG CELSIUS 5TH RESISTANCE-TEMPERATURE POINT |
| 100.0 DEG CELSIUS 6TH RESISTANCE-TEMPERATURE POINT |
| 125.0 DEG CELSIUS 7TH RESISTANCE-TEMPERATURE POINT |
| ZERO POWER RESISTANCE AT SPECIFIED TEMP | 300.0 KILOHMS 1ST RESISTANCE-TEMPERATURE POINT |
| 22.14 KILOHMS 2ND RESISTANCE-TEMPERATURE POINT |
| 9.81 KILOHMS 3RD RESISTANCE-TEMPERATURE POINT |
| 1.08 KILOHMS 4TH RESISTANCE-TEMPERATURE POINT |
| 444.0 OHMS 5TH RESISTANCE-TEMPERATURE POINT |
| 202.5 OHMS 6TH RESISTANCE-TEMPERATURE POINT |
| 102.0 OHMS 7TH RESISTANCE-TEMPERATURE POINT |
| RESISTANCE TOLERANCE AT A SPECIFIED TEMP IN PERCENT | -15.0 TO 15.0 1ST RESISTANCE-TEMPERATURE POINT |
| -9.0 TO 9.0 2ND RESISTANCE-TEMPERATURE POINT |
| -7.0 TO 7.0 3RD RESISTANCE-TEMPERATURE POINT |
| -7.0 TO 7.0 4TH RESISTANCE-TEMPERATURE POINT |
| -9.0 TO 9.0 5TH RESISTANCE-TEMPERATURE POINT |
| -12.0 TO 12.0 6TH RESISTANCE-TEMPERATURE POINT |
| -15.0 TO 15.0 7TH RESISTANCE-TEMPERATURE POINT |
| BODY OUTSIDE DIAMETER | 0.200 INCHES NOMINAL |
| BODY WIDTH | 0.080 INCHES NOMINAL |
| TERMINAL LENGTH | 1.500 INCHES NOMINAL |
| TERMINAL DIAMETER | 0.020 INCHES NOMINAL |
| TEST DATA DOCUMENT | 18876-13239605 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| REFERENCE TEMP IN DEG CELSIUS | 25.0 |
| CUBIC MEASURE | 0.003 CUBIC INCHES |