|
|
|
National Stock Number:
5905-01-274-6968
Federal Supply Class:
5905
National Item Identification Number:
012746968
Description:
RESISTOR NETWORK,FIXED,FILM
Detail:
An arrangement of multiple fixed resistive elements or discrete resistors permanently encased, encapsulated, or potted together, to form an inseparable unit. The resistive elements, consisting of a thin layer of conductive material deposited on or fused to an insulating base, usually are electrically connected to each other and may be arranged in any circuit configuration. Excludes RESISTOR, FIXED (as modified); RESISTOR ASSEMBLY; RESISTOR NETWORK, FIXED-VARIABLE; and RESISTOR SET, MATCHED.
|
Manufacturer Information:
| 10127814 | A486G | NIMIKKEISTOKESKUS NCB FINLAND | | 7900AP-05-3321-G | 57027 | INTERNATIONAL RESISTIVE COMPANY OF TEXAS, LLC | | 795332-3321GDB | 73030 | HAMILTON SUNDSTRAND CORPORATION |
|
Techincal Specification:
| ELECTRICAL RESISTANCE | 3.320 KILOHMS EACH RESISTOR | | AMBIENT TEMP IN DEG CELSIUS AT FULL RATED POWER | 70.0 | | AMBIENT TEMP IN DEG CELSIUS AT ZERO PERCENT RATED POWER | 150.0 | | BODY HEIGHT | 0.065 INCHES MINIMUM AND 0.085 INCHES MAXIMUM | | BODY LENGTH | 0.342 INCHES MINIMUM AND 0.358 INCHES MAXIMUM | | BODY WIDTH | 0.342 INCHES MINIMUM AND 0.358 INCHES MAXIMUM | | CUBIC MEASURE | 0.011 CUBIC INCHES | | IDENTICAL VALUE RESISTOR QUANTITY | 19 EACH RESISTOR | | INCLOSURE METHOD | ENCAPSULATED | | POWER DISSIPATION RATING IN WATTS | 1.000 TOTAL NETWORK | | RELIABILITY INDICATOR | NOT ESTABLISHED | | RESISTANCE TOLERANCE IN PERCENT | -2.000 TO 2.000 EACH RESISTOR | | SCHEMATIC DIAGRAM DESIGNATOR | SERIES NETWORK | | STYLE DESIGNATOR | FLAT PACK | | TEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS | -100.0 TO 100.0 | | TEMP RANGE OF TEMP COEFFICIENT IN DEG CELSIUS | -55.0 TO 150.0 | | TERMINAL LENGTH | 0.045 INCHES MINIMUM AND 0.095 INCHES MAXIMUM | | TERMINAL QUANTITY | 20 | | TERMINAL TYPE | TAB, SOLDER LUG | | TERMINAL WIDTH | 0.025 INCHES MINIMUM AND 0.035 INCHES MAXIMUM | | TEST DATA DOCUMENT | 73030-795332 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
|
|