|
|
|
National Stock Number:
5905-01-277-8516
Federal Supply Class:
5905
National Item Identification Number:
012778516
Description:
RESISTOR,VARIABLE,NONWIRE WOUND,
Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus or minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.
|
Manufacturer Information:
| GA2T036F502UA | 01121 | ROCKWELL AUTOMATION, INC. |
|
Techincal Specification:
| EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 270.0 NOMINAL | | ELECTRICAL RESISTANCE PER SECTION | 5.0 KILOHMS SINGLE SECTION | | ACTUATOR TRAVEL CONTROL FEATURE | STOPS | | ACTUATOR TYPE | SINGLE SHAFT | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 70.0 SINGLE SECTION | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 120.0 SINGLE SECTION | | BODY DIAMETER | 0.484 INCHES MINIMUM AND 0.516 INCHES MAXIMUM | | BODY LENGTH | 0.469 INCHES MAXIMUM | | BODY STYLE | CYLINDRICAL BUSHING MOUNTED | | CUBIC MEASURE | 0.098 CUBIC INCHES | | DEVICE DESIGN TYPE | NONTURN AT 9 OCLOCK | | DEVICE DESIGN TYPE | NONTURN AT 3 OCLOCK | | FEATURES PROVIDED | PANEL SEAL AND SHAFT SEAL | | FIRST FLAT LENGTH | 0.234 INCHES MINIMUM AND 0.266 INCHES MAXIMUM | | FLAT HEIGHT | 0.092 INCHES MINIMUM AND 0.096 INCHES MAXIMUM | | MAXIMUM RUNNING TORQUE | 3.00 INCH-OUNCES | | MAXIMUM STARTING TORQUE | 3.00 INCH-OUNCES | | MAXIMUM STOP TORQUE | 64.00 INCH-OUNCES | | MECHANICAL BACKLASH IN DEG ANGULAR ROTATION | 3.0 | | MOUNTING BUSHING LENGTH | 0.250 INCHES NOMINAL | | MOUNTING METHOD | STANDARD BUSHING | | NONTURN DEVICE RADIUS | 0.240 INCHES MINIMUM AND 0.250 INCHES MAXIMUM | | POWER DISSIPATION RATING PER SECTION IN WATTS | 0.5 FREE AIR SINGLE SECTION | | RELIABILITY INDICATOR | NOT ESTABLISHED | | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0 TO 10.0 SINGLE SECTION | | RESISTANCE TEMP CHARACTERISTIC RANGE PER SECTION IN PERCENT | +0.0 TO 7.0 -55 DEG CELSIUS SINGLE SECTION AND +0.0 TO 3.5 -25 DEG CELSIUS SINGLE SECTION AND +0.0 TO 2.0 0 DEG CELSIUS SINGLE SECTION AND -2.5 TO 2.5 85 DEG CELSIUS SINGLE SECTION AND -5.5 TO 5.5 120 DEG CELSIUS SINGLE SECTION | | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 295.0 NOMINAL | | SCREW THREAD DIAMETER | 0.250 INCHES NOMINAL | | SCREW THREAD QUANTITY PER INCH | 32.0 | | SCREW THREAD SERIES DESIGNATOR | UNEF | | SECTION QUANTITY | 1 | | SHAFT DIAMETER | 0.124 INCHES MINIMUM AND 0.126 INCHES MAXIMUM | | SHAFT BEARING TYPE | SLEEVE | | SHAFT LENGTH | 0.563 INCHES MAXIMUM | | SHAFT STYLE | ROUND, FLATTED | | TERMINAL LOCATION | REAR END | | TERMINAL TYPE AND QUANTITY | 3 TAB, SOLDER LUG |
|
|