|
|
|
National Stock Number:
5905-01-282-6035
Federal Supply Class:
5905
National Item Identification Number:
012826035
Description:
RESISTOR,VARIABLE,NONWIRE WOUND,
Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus or minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.
|
Manufacturer Information:
| 540 00001 15 | 18410 | RYCOM INSTRUMENTS, INC. | | WM4275A | 58756 | CTS CORP ELECTROMECHANICAL DIV |
|
Techincal Specification:
| EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 295.0 MINIMUM AND 305.0 MAXIMUM | | ELECTRICAL RESISTANCE PER SECTION | 25.0 KILOHMS SINGLE SECTION | | ACTUATOR TYPE | SINGLE SHAFT | | BODY DIAMETER | 0.938 INCHES NOMINAL | | BODY LENGTH | 0.453 INCHES NOMINAL | | BODY STYLE | CYLINDRICAL BUSHING MOUNTED | | CUBIC MEASURE | 0.313 CUBIC INCHES | | FEATURES PROVIDED | HUMIDITY PROOF | | FRAGILITY FACTOR | MODERATELY RUGGED | | MAXIMUM RUNNING TORQUE | 6.00 INCH-OUNCES | | MAXIMUM STARTING TORQUE | 6.00 INCH-OUNCES | | MOUNTING BUSHING LENGTH | 0.359 INCHES MINIMUM AND 0.390 INCHES MAXIMUM | | MOUNTING METHOD | STANDARD BUSHING | | POWER DISSIPATION RATING PER SECTION IN WATTS | 0.3 FREE AIR SINGLE SECTION | | RELIABILITY INDICATOR | NOT ESTABLISHED | | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -30.0 TO 30.0 SINGLE SECTION | | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 295.0 MINIMUM AND 305.0 MAXIMUM | | SCREW THREAD DIAMETER | 0.375 INCHES NOMINAL | | SCREW THREAD QUANTITY PER INCH | 32.0 | | SCREW THREAD SERIES DESIGNATOR | UNEF | | SECTION QUANTITY | 1 | | SHAFT BEARING TYPE | SLEEVE | | SHAFT DIAMETER | 0.248 INCHES MINIMUM AND 0.250 INCHES MAXIMUM | | SHAFT LENGTH | 0.325 INCHES NOMINAL | | SHAFT STYLE | ROUND | | SPECIAL FEATURES | TAPER TO BE CTS A MODIFIED ON CCW END TO GIVE MAX OF 7.5 OHM DC END RESISTANCE OR 70 DB DOWN FROM A1000HZ 3 VOLT LEVEL APPLIED ACROSS TOTAL RESISTANCE | | TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE | | TERMINAL TYPE AND QUANTITY | 3 TAB, SOLDER LUG |
|
|