| ELECTRICAL RESISTANCE | 2.490 KILOHMS LOWEST RESISTANCE VALUE |
| ELECTRICAL RESISTANCE | 20.500 KILOHMS 2ND INTERMEDIATE RESISTANCE VALUE |
| ELECTRICAL RESISTANCE | 6.490 KILOHMS 1ST INTERMEDIATE RESISTANCE VALUE |
| ELECTRICAL RESISTANCE | 90.900 KILOHMS HIGHEST RESISTANCE VALUE |
| AMBIENT TEMP IN DEG CELSIUS AT FULL RATED POWER | 70.0 |
| AMBIENT TEMP IN DEG CELSIUS AT ZERO PERCENT RATED POWER | 150.0 |
| BODY HEIGHT | 0.177 INCHES MINIMUM AND 0.197 INCHES MAXIMUM |
| BODY LENGTH | 0.768 INCHES MINIMUM AND 0.798 INCHES MAXIMUM |
| BODY WIDTH | 0.056 INCHES MINIMUM AND 0.103 INCHES MAXIMUM |
| CUBIC MEASURE | 0.011 CUBIC INCHES |
| IDENTICAL VALUE RESISTOR QUANTITY | 1 1ST INTERMEDIATE RESISTANCE VALUE |
| IDENTICAL VALUE RESISTOR QUANTITY | 1 LOWEST RESISTANCE VALUE |
| IDENTICAL VALUE RESISTOR QUANTITY | 2 2ND INTERMEDIATE RESISTANCE VALUE |
| IDENTICAL VALUE RESISTOR QUANTITY | 2 HIGHEST RESISTANCE VALUE |
| INCLOSURE METHOD | ENCAPSULATED |
| POWER DISSIPATION RATING IN WATTS | 0.600 TOTAL NETWORK |
| RELIABILITY INDICATOR | NOT ESTABLISHED |
| RESISTANCE TOLERANCE IN PERCENT | -5.000 TO 5.000 EACH RESISTOR |
| SCHEMATIC DIAGRAM DESIGNATOR | ISOLATED ARRAY |
| STYLE DESIGNATOR | SINGLE INLINE |
| TEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS | -10.0 TO 10.0 |
| TEMP RANGE OF TEMP COEFFICIENT IN DEG CELSIUS | -55.0 TO 150.0 |
| TERMINAL LENGTH | 0.125 INCHES MINIMUM AND 0.150 INCHES MAXIMUM |
| TERMINAL QUANTITY | 8 |
| TERMINAL TYPE | PIN |
| TEST DATA DOCUMENT | 82577-654604 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| UNPACKAGED UNIT WEIGHT | 1.5 GRAMS |