| EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 265.0 MINIMUM AND 275.0 MAXIMUM |
| ELECTRICAL RESISTANCE PER SECTION | 5.0 KILOHMS SINGLE SECTION |
| ACTUATOR TYPE | SINGLE SHAFT |
| ACTUATOR TRAVEL CONTROL FEATURE | STOPS |
| AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 40.0 SINGLE SECTION |
| AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 135.0 SINGLE SECTION |
| BEARING TYPE | SLEEVE SHAFT |
| BODY DIAMETER | 0.865 INCHES MINIMUM AND 0.885 INCHES MAXIMUM |
| BODY LENGTH | 1.458 INCHES MINIMUM AND 1.478 INCHES MAXIMUM |
| BODY STYLE | CYLINDRICAL BUSHING MOUNTED |
| CUBIC MEASURE | 0.895 CUBIC INCHES |
| FEATURES PROVIDED | HUMIDITY PROOF AND SHAFT SEAL AND SWITCH |
| FIRST FLAT LENGTH | 0.487 INCHES MINIMUM AND 0.503 INCHES MAXIMUM |
| FLAT HEIGHT | 0.216 INCHES MINIMUM AND 0.220 INCHES MAXIMUM |
| FRAGILITY FACTOR | MODERATELY RUGGED |
| FUNCTION CHARACTERISTIC PER SECTION | SINGLE SECTION LINEAR |
| FUNCTION CONFORMITY PER SECTION | SINGLE SECTION INDEPENDENT LINEARITY |
| FUNCTION CONFORMITY TOLERANCE PER SECTION | -1.00 TO 1.00 SINGLE SECTION |
| MAXIMUM RUNNING TORQUE | 6.00 INCH-OUNCES |
| MAXIMUM STARTING TORQUE | 15.00 INCH-OUNCES |
| MAXIMUM STOP TORQUE | 240.00 INCH-OUNCES |
| MECHANICAL BACKLASH IN DEG ANGULAR ROTATION | 2.0 |
| MOUNTING BUSHING LENGTH | 0.250 INCHES NOMINAL |
| MOUNTING METHOD | STANDARD BUSHING |
| NONTURN DEVICE LOCATION | AT 3 OCLOCK |
| NONTURN DEVICE RADIUS | 0.375 INCHES NOMINAL |
| POWER DISSIPATION RATING PER SECTION IN WATTS | 4.0 FREE AIR SINGLE SECTION |
| RELIABILITY INDICATOR | NOT ESTABLISHED |
| RESISTANCE TOLERANCE PER SECTION IN PERCENT | -5.0 TO 5.0 SINGLE SECTION |
| ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 295.0 MINIMUM AND 305.0 MAXIMUM |
| SCREW THREAD DIAMETER | 0.375 INCHES NOMINAL |
| SCREW THREAD QUANTITY PER INCH | 32.0 |
| SCREW THREAD SERIES DESIGNATOR | UNEF |
| SECTION QUANTITY | 1 |
| SHAFT DIAMETER | 0.248 INCHES MINIMUM AND 0.250 INCHES MAXIMUM |
| SHAFT LENGTH | 0.865 INCHES MINIMUM AND 0.885 INCHES MAXIMUM |
| SHAFT STYLE | ROUND, FLATTED |
| SWITCH CONTACT ARRANGEMENT | DOUBLE POLE, SINGLE THROW, NORMALLY OPEN |
| SWITCH CURRENT TYPE AND RATING IN AMPS | 8.000 DC |
| SWITCH OPERATING POSITION | START OF ROTATION |
| SWITCH TYPE | ROTARY |
| SWITCH VOLTAGE RATING IN VOLTS | 28.0 |
| TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| TERMINAL TYPE AND QUANTITY | 7 SOLDER STUD |
| TEST DATA DOCUMENT | 76301-5-1680 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |