|
|
|
National Stock Number:
5905-01-289-9439
Federal Supply Class:
5905
National Item Identification Number:
012899439
Description:
RESISTOR,FIXED,WIRE WOUND,INDUCT
Detail:
INC 37403 REINSTATED ON 010303~A resistor whose ohmic value cannot be adjusted or varied. The resistance element consists of high resistance wire (or ribbon) either wound on an insulated form or constructed so as to be self-supporting. The item must have inherent characteristics of inducing self-inductance. Opposition to current flow is an inherent property of the resistance wire and is manifested by the heat dissipation in the resistor. Excludes SUPPRESSOR, IGNITION INTERFERENCE. See also RESISTOR (1), FIXED, WIRE WOUND, NONINDUCTIVE.
|
Manufacturer Information:
| 55SC160 | 16119 | GAMBLE CHARLES T INDUSTRIES | | 5859120-1 | 53711 | NAVAL SEA SYSTEMS COMMAND | | P66882 | 16119 | GAMBLE CHARLES T INDUSTRIES | | FSOT5509E160R0JE | 91637 | VISHAY DALE ELECTRONICS, LLC | | HL-55-09Z 160 OHMS 5PCT | 91637 | VISHAY DALE ELECTRONICS, LLC | | HL-55-09Z-160R0J | 91637 | VISHAY DALE ELECTRONICS, LLC |
|
Techincal Specification:
| ELECTRICAL RESISTANCE | 160.000 OHMS | | AMBIENT TEMP AT FULL RATED POWER | 40.0 CELSIUS | | AMBIENT TEMP IN DEG CELSIUS AT ZERO PERCENT RATED POWER | 340.0 | | BODY LENGTH | 3.438 INCHES MINIMUM AND 4.562 INCHES MAXIMUM | | BODY WIDTH | 1.062 INCHES MAXIMUM | | CUBIC MEASURE | 2.400 CUBIC INCHES | | DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH | 4.250 INCHES NOMINAL | | INCLOSURE TYPE | ENCAPSULATED | | MOUNTING HOLE SIZE | 0.190 INCHES MINIMUM AND 0.218 INCHES MAXIMUM | | POWER DISSIPATION RATING IN WATTS | 55.000 FREE AIR | | RELIABILITY INDICATOR | NOT ESTABLISHED | | RESISTANCE TOLERANCE IN PERCENT | -5.000 TO 5.000 | | STYLE DESIGNATOR | TERMINALS ONE EDGE | | TEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS | -260.0 TO 260.0 | | TEMP RANGE OF TEMP COEFFICIENT IN DEG CELSIUS | -55.0 TO 340.0 | | TERMINAL LENGTH | 0.376 INCHES MINIMUM AND 0.500 INCHES MAXIMUM | | TERMINAL TYPE | TAB, SOLDER LUG | | TERMINAL WIDTH | 0.172 INCHES MINIMUM AND 0.265 INCHES MAXIMUM | | TEST DATA DOCUMENT | 53711-5859120 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) | | UNPACKAGED UNIT WEIGHT | 43.1 GRAMS |
|
|