| EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 295.0 MINIMUM AND 305.0 MAXIMUM |
| ELECTRICAL RESISTANCE PER SECTION | 2.5 KILOHMS 2ND SECTION |
| ELECTRICAL RESISTANCE PER SECTION | 2.5 KILOHMS 3RD SECTION |
| ELECTRICAL RESISTANCE PER SECTION | 45.0 OHMS 1ST SECTION |
| ACTUATOR TRAVEL CONTROL FEATURE | STOPS |
| ACTUATOR TYPE | SINGLE SHAFT |
| AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 25.0 ALL SECTIONS |
| AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 340.0 ALL SECTIONS |
| BEARING TYPE | BEARING SHAFT |
| BODY DIAMETER | 3.000 INCHES NOMINAL |
| BODY LENGTH | 6.281 INCHES MINIMUM AND 6.344 INCHES MAXIMUM |
| BODY STYLE | CYLINDRICAL BUSHING MOUNTED |
| CUBIC MEASURE | 45.400 CUBIC INCHES |
| FEATURES PROVIDED | PANEL SEAL |
| FIRST FLAT LENGTH | 0.312 INCHES MINIMUM AND 0.375 INCHES MAXIMUM |
| FLAT HEIGHT | 0.188 INCHES NOMINAL |
| FRAGILITY FACTOR | MODERATELY RUGGED |
| MAXIMUM RUNNING TORQUE | 40.00 INCH-OUNCES |
| MAXIMUM STARTING TORQUE | 64.00 INCH-OUNCES |
| MAXIMUM STOP TORQUE | 240.00 INCH-OUNCES |
| MOUNTING BUSHING LENGTH | 0.594 INCHES MINIMUM AND 0.656 INCHES MAXIMUM |
| MOUNTING FACILITY QUANTITY | 4 |
| MOUNTING METHOD | STANDARD BUSHING AND THREADED HOLE |
| POWER DISSIPATION RATING PER SECTION IN WATTS | 25.0 FREE AIR 2ND SECTION |
| POWER DISSIPATION RATING PER SECTION IN WATTS | 25.0 FREE AIR 3RD SECTION |
| POWER DISSIPATION RATING PER SECTION IN WATTS | 50.0 FREE AIR 1ST SECTION |
| RELIABILITY INDICATOR | NOT ESTABLISHED |
| RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0 TO 10.0 ALL SECTIONS |
| ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 295.0 MINIMUM AND 305.0 MAXIMUM |
| SCREW THREAD DIAMETER | 0.375 INCHES NOMINAL AND 0.164 INCHES NOMINAL |
| SCREW THREAD QUANTITY PER INCH | 32.0 |
| SCREW THREAD SERIES DESIGNATOR | UNEF AND UNC |
| SECTION QUANTITY | 3 |
| SHAFT DIAMETER | 0.219 INCHES MINIMUM AND 0.281 INCHES MAXIMUM |
| SHAFT LENGTH | 1.125 INCHES NOMINAL |
| SHAFT STYLE | ROUND, FLATTED |
| SPECIAL FEATURES | THREE VARIABLES MOUNTED IN STEEL BRACKET |
| TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| TERMINAL TYPE AND QUANTITY | 9 TAB, SOLDER LUG |
| TEST DATA DOCUMENT | 06481-914107 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |