|
|
|
National Stock Number:
5905-01-292-5851
Federal Supply Class:
5905
National Item Identification Number:
012925851
Description:
RESISTOR,VARIABLE,NONWIRE WOUND,
Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus or minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.
|
Manufacturer Information:
| 3059L-1-100 | 32997 | BOURNS INC | | 3059L-1-100 | 80294 | BOURNS INSTRUMENTS INC | | MIL-PRF-22097/2 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MIL-R-22097/2 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MIL-R-39035/1 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | RJ12FL100 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | RJR12FL100M | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| FRAGILITY FACTOR | MODERATELY RUGGED | | SHAFT DIAMETER | 0.110 INCHES MINIMUM AND 0.120 INCHES MAXIMUM | | FEATURES PROVIDED | HUMIDITY PROOF | | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 9720.0 MAXIMUM | | ACTUATOR TRAVEL CONTROL FEATURE | CLUTCH | | TERMINAL TYPE AND QUANTITY | 3 WIRE LEAD | | TERMINAL LOCATION | REAR END | | BODY LENGTH | 1.218 INCHES MINIMUM AND 1.282 INCHES MAXIMUM | | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0 TO 10.0 SINGLE SECTION | | SECTION QUANTITY | 1 | | SHAFT STYLE | ROUND, SLOTTED | | CUBIC MEASURE | 0.079 CUBIC INCHES | | BODY STYLE | RECTANGULAR W/MOUNTING HOLES/SLOTS | | RELIABILITY INDICATOR | NOT ESTABLISHED | | MAXIMUM STARTING TORQUE | 8.00 INCH-OUNCES | | MAXIMUM RUNNING TORQUE | 8.00 INCH-OUNCES | | LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS | 0.995 INCHES MINIMUM AND 1.005 INCHES MAXIMUM | | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -100.0 TO 100.0 SINGLE SECTION | | ELECTRICAL RESISTANCE PER SECTION | 10.0 OHMS SINGLE SECTION | | SHAFT BEARING TYPE | SLEEVE | | BODY HEIGHT | 0.300 INCHES MINIMUM AND 0.330 INCHES MAXIMUM | | BODY WIDTH | 0.180 INCHES MINIMUM AND 0.200 INCHES MAXIMUM | | MOUNTING METHOD | UNTHREADED HOLE | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 150.0 SINGLE SECTION | | POWER DISSIPATION RATING PER SECTION IN WATTS | 0.75 FREE AIR SINGLE SECTION | | TEST DATA DOCUMENT | 81349-MIL-R-22097 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). | | SHAFT LENGTH | 0.036 INCHES MINIMUM AND 0.080 INCHES MAXIMUM | | ACTUATOR TYPE | SINGLE SHAFT | | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 6120.0 MINIMUM AND 9720.0 MAXIMUM | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 85.0 SINGLE SECTION | | MOUNTING FACILITY QUANTITY | 2 | | MOUNTING HOLE DIAMETER | 0.088 INCHES MINIMUM AND 0.098 INCHES MAXIMUM | | SPECIFICATION/STANDARD DATA | 81349-MIL-R-22097/2 GOVERNMENT SPECIFICATION |
|
|