|
|
|
National Stock Number:
5905-01-292-9095
Federal Supply Class:
5905
National Item Identification Number:
012929095
Description:
RESISTOR NETWORK,FIXED,FILM
Detail:
An arrangement of multiple fixed resistive elements or discrete resistors permanently encased, encapsulated, or potted together, to form an inseparable unit. The resistive elements, consisting of a thin layer of conductive material deposited on or fused to an insulating base, usually are electrically connected to each other and may be arranged in any circuit configuration. Excludes RESISTOR, FIXED (as modified); RESISTOR ASSEMBLY; RESISTOR NETWORK, FIXED-VARIABLE; and RESISTOR SET, MATCHED.
|
Manufacturer Information:
| 494-005-16 | 67318 | MEPCO/CENTRALAB INC A NORTH AMERICAN PHILIPS CO | | 912130-16 | 06481 | NORTHROP GRUMMAN SYSTEMS CORPORATION |
|
Techincal Specification:
| ELECTRICAL RESISTANCE | 1.800 KILOHMS | | AMBIENT TEMP IN DEG CELSIUS AT FULL RATED POWER | 20.0 | | AMBIENT TEMP IN DEG CELSIUS AT ZERO PERCENT RATED POWER | 175.0 | | BODY HEIGHT | 0.065 INCHES MAXIMUM | | BODY LENGTH | 0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM | | BODY WIDTH | 0.270 INCHES MAXIMUM | | CUBIC MEASURE | 0.006 CUBIC INCHES | | IDENTICAL VALUE RESISTOR QUANTITY | 8 EACH RESISTOR | | INCLOSURE METHOD | ENCAPSULATED | | POWER DISSIPATION RATING IN WATTS | 0.200 EACH RESISTOR | | PROPRIETARY CHARACTERISTICS | PACS | | RELIABILITY INDICATOR | NOT ESTABLISHED | | RESISTANCE TOLERANCE IN PERCENT | -5.000/+5.000 | | SCHEMATIC DIAGRAM DESIGNATOR | ISOLATED ARRAY | | STYLE DESIGNATOR | FLAT PACK | | TEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS | -300.0/+300.0 | | TEMP RANGE OF TEMP COEFFICIENT IN DEG CELSIUS | -55.0/+175.0 | | TERMINAL LENGTH | 0.175 INCHES MINIMUM | | TERMINAL QUANTITY | 14 | | TERMINAL TYPE | TAB, SOLDER LUG | | TERMINAL WIDTH | 0.015 INCHES MINIMUM AND 0.019 INCHES MAXIMUM | | TEST DATA DOCUMENT | 06481-912130 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
|
|