|
|
|
National Stock Number:
5905-01-293-2389
Federal Supply Class:
5905
National Item Identification Number:
012932389
Description:
RESISTOR,VARIABLE,NONWIRE WOUND,
Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus or minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.
|
Manufacturer Information:
| 1804182-5 | 03956 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | 1804182-5 | 50139 | ALLEN BRADLEY CO ELECTRONICS DIV |
|
Techincal Specification:
| EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 305.0 NOMINAL | | ELECTRICAL RESISTANCE PER SECTION | 5.0 KILOHMS SINGLE SECTION | | ACTUATOR TYPE | SINGLE SHAFT | | ACTUATOR TRAVEL CONTROL FEATURE | STOPS | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 70.0 SINGLE SECTION | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 120.0 SINGLE SECTION | | BODY HEIGHT | 0.620 INCHES NOMINAL | | BODY LENGTH | 1.075 INCHES MINIMUM AND 1.169 INCHES MAXIMUM | | BODY STYLE | RECTANGULAR BUSHING MOUNTED | | BODY WIDTH | 0.620 INCHES NOMINAL | | FEATURES PROVIDED | HUMIDITY PROOF AND SWITCH | | III CUBIC MEASURE | 0.432 CUBIC INCHES | | III FRAGILITY FACTOR | MODERATELY RUGGED | | POWER DISSIPATION RATING PER SECTION IN WATTS | 1.0 FREE AIR SINGLE SECTION | | PROPRIETARY CHARACTERISTICS | PACS | | MAXIMUM RUNNING TORQUE | 6.00 INCH-OUNCES | | MAXIMUM STARTING TORQUE | 6.00 INCH-OUNCES | | MAXIMUM STOP TORQUE | 64.00 INCH-OUNCES | | MOUNTING BUSHING LENGTH | 0.250 INCHES NOMINAL | | MOUNTING METHOD | STANDARD BUSHING | | NONTURN DEVICE LOCATION | AT 9 OCLOCK | | NONTURN DEVICE RADIUS | 0.305 INCHES NOMINAL | | RELIABILITY INDICATOR | NOT ESTABLISHED | | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0 TO 10.0 SINGLE SECTION | | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 305.0 NOMINAL | | SCREW THREAD DIAMETER | 0.250 INCHES NOMINAL | | SCREW THREAD QUANTITY PER INCH | 32.0 | | SCREW THREAD SERIES DESIGNATOR | UNEF | | SECTION QUANTITY | 1 | | SHAFT BEARING TYPE | SLEEVE | | SHAFT DIAMETER | 0.124 INCHES MINIMUM AND 0.126 INCHES MAXIMUM | | SHAFT LENGTH | 0.875 INCHES NOMINAL | | SHAFT STYLE | ROUND | | SWITCH OPERATING POSITION | ANY POSITION OF ROTATION TRAVEL | | SWITCH TYPE | PUSH-PULL | | SWITCH VOLTAGE RATING IN VOLTS | 125.0 | | SWITCH CONTACT ARRANGEMENT | DOUBLE POLE, DOUBLE THROW | | SWITCH CURRENT TYPE AND RATING IN AMPS | 2.000 AC | | TERMINAL LOCATION | RIGHT-LEFT ADJACENT SIDES | | TERMINAL TYPE AND QUANTITY | 11 TAB, SOLDER LUG | | TEST DATA DOCUMENT | 03956-1804182 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
|
|