|
|
|
National Stock Number:
5905-01-294-6653
Federal Supply Class:
5905
National Item Identification Number:
012946653
Description:
RESISTOR,FIXED,WIRE WOUND,INDUCT
Detail:
INC 37403 REINSTATED ON 010303~A resistor whose ohmic value cannot be adjusted or varied. The resistance element consists of high resistance wire (or ribbon) either wound on an insulated form or constructed so as to be self-supporting. The item must have inherent characteristics of inducing self-inductance. Opposition to current flow is an inherent property of the resistance wire and is manifested by the heat dissipation in the resistor. Excludes SUPPRESSOR, IGNITION INTERFERENCE. See also RESISTOR (1), FIXED, WIRE WOUND, NONINDUCTIVE.
|
Manufacturer Information:
| 913342-46 | 12697 | CLAROSTAT SENSORS AND CONTROLS | | 913342-46 | 16119 | GAMBLE CHARLES T INDUSTRIES | | L04056 | 16236 | DLA LAND AND MARITIME DBA ENGINEERING AND TECHNICAL SUPPORT DIV DOCUMENT STANDARDIZATION DIVISION (VENDOR ITEM DRAWINGS) | | 913342-46 | 44655 | OHMITE HOLDING, L.L.C. | | 913342-46 | 94271 | LOCKHEED MARTIN CORP |
|
Techincal Specification:
| ELECTRICAL RESISTANCE | 400.000 OHMS | | AMBIENT TEMP AT FULL RATED POWER | 40.0 CELSIUS | | AMBIENT TEMP IN DEG CELSIUS AT ZERO PERCENT RATED POWER | 415.0 | | BODY DIAMETER | 1.120 INCHES MINIMUM AND 1.130 INCHES MAXIMUM | | BODY LENGTH | 8.495 INCHES MINIMUM AND 8.505 INCHES MAXIMUM | | CRITICALITY CODE JUSTIFICATION | FEAT | | CUBIC MEASURE | 8.525 CUBIC INCHES | | INCLOSURE TYPE | ENCAPSULATED | | POWER DISSIPATION RATING IN WATTS | 180.000 FREE AIR | | RELIABILITY INDICATOR | NOT ESTABLISHED | | RESISTANCE TOLERANCE IN PERCENT | -10.000 TO 10.000 | | SPECIAL FEATURES | ITEM MUST COMPLY WITH REQUIREMENTS OF DEFENSE ELECTRONICS SUPPLY CENTER PRODUCTION STANDARD NO. L04056; FOR NAVY NUCLEAR PROPULSION PLANT PRODUCTS ONLY | | STYLE DESIGNATOR | RADIAL TERMINAL EACH END | | TERMINAL LENGTH | 0.558 INCHES MINIMUM AND 0.568 INCHES MAXIMUM | | TERMINAL TYPE | TAB W/SCREW | | TERMINAL WIDTH | 0.245 INCHES MINIMUM AND 0.255 INCHES MAXIMUM | | TEST DATA DOCUMENT | 14933-L04056 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) | | UNPACKAGED UNIT WEIGHT | 100.0 GRAMS |
|
|