|
|
|
National Stock Number:
5905-01-294-6655
Federal Supply Class:
5905
National Item Identification Number:
012946655
Description:
RESISTOR,FIXED,WIRE WOUND
Detail:
INC 37404 REINSTATED ON 010303~A resistor whose ohmic value cannot be adjusted or varied. The resistance element consists of high resistance wire (or ribbon) either wound on an insulated form or constructed so as to be self-supporting. The items must have inherent characteristics of inducing little or no self-inductance. Opposition to current flow is an inherent property of the resistance wire and is manifested by the heat dissipation in the resistor. Excludes SUPPRESSOR, IGNITION INTERFERENCE. See also RESISTOR (1), FIXED, WIRE WOUND, INDUCTIVE.
|
Manufacturer Information:
| ALN-10,.499 OHM, | 54294 | SHALLCROSS INC | | ALN10-0R499F | 54294 | SHALLCROSS INC | | MCX100-0R499F | 14193 | CAL-R INC | | GR815DL-R499F10 | 26512 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | NH-10 0.499 OHM 1PCT | 91637 | VISHAY DALE ELECTRONICS, LLC | | NH10-0R499F | 91637 | VISHAY DALE ELECTRONICS, LLC |
|
Techincal Specification:
| ELECTRICAL RESISTANCE | 0.499 OHMS | | AMBIENT TEMP AT FULL RATED POWER | 25.0 CELSIUS | | AMBIENT TEMP IN DEG CELSIUS AT ZERO PERCENT RATED POWER | 275.0 | | BODY HEIGHT | 0.375 INCHES MINIMUM AND 0.405 INCHES MAXIMUM | | BODY LENGTH | 0.719 INCHES MINIMUM AND 0.781 INCHES MAXIMUM | | BODY WIDTH | 0.405 INCHES MINIMUM AND 0.435 INCHES MAXIMUM | | CUBIC MEASURE | 0.137 CUBIC INCHES | | DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH | 0.557 INCHES MINIMUM AND 0.567 INCHES MAXIMUM | | INCLOSURE TYPE | ENCASED | | MOUNTING HOLE SIZE | 0.088 INCHES MINIMUM AND 0.098 INCHES MAXIMUM | | POWER DISSIPATION RATING IN WATTS | 12.500 FREE AIR | | RELIABILITY INDICATOR | NOT ESTABLISHED | | RESISTANCE TOLERANCE IN PERCENT | -1.000 TO 1.000 | | STYLE DESIGNATOR | AXIAL TERMINAL (S) | | TEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS | -100.0 TO 100.0 | | TEMP RANGE OF TEMP COEFFICIENT IN DEG CELSIUS | -55.0 TO 275.0 | | TERMINAL LENGTH | 0.250 INCHES MINIMUM AND 0.374 INCHES MAXIMUM | | TERMINAL TYPE | TAB, SOLDER LUG |
|
|