5905-01-296-2165 RESISTOR,VARIABLE,NONWIRE WOUND, Index 5910-01-296-2167 CAPACITOR,FIXED,ELECTROLYTIC

National Stock Number:
5905-01-296-2166

Federal Supply Class:
5905

National Item Identification Number:
012962166

Description:
RESISTOR,VARIABLE,NONWIRE WOUND,

Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus or minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.


Manufacturer Information:
148-005202111VISHAY SPRAGUE INC
B75A0022-212464MCDONNELL DOUGLAS CORP MCDONNELL DOUGLAS ELECTRONIC SYSTEMS CO
CM45747-212697CLAROSTAT SENSORS AND CONTROLS


Techincal Specification:
EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION260.0 MINIMUM AND 270.0 MAXIMUM
ELECTRICAL RESISTANCE PER SECTION10.0 KILOHMS SINGLE SECTION
ACTUATOR TRAVEL CONTROL FEATURESTOPS
ACTUATOR TYPESINGLE SHAFT
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER70.0 SINGLE SECTION
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER120.0 SINGLE SECTION
BODY HEIGHT0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM
BODY LENGTH0.750 INCHES MINIMUM AND 0.812 INCHES MAXIMUM
BODY STYLERECTANGULAR BUSHING MOUNTED
BODY WIDTH0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM
CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL0.095 INCHES MINIMUM AND 0.105 INCHES MAXIMUM
CENTER TO CENTER DISTANCE BETWEEN TERMINALS0.195 INCHES MINIMUM AND 0.205 INCHES MAXIMUM
CUBIC MEASURE0.114 CUBIC INCHES
DEVICE DESIGN TYPENONTURN AT 9 OCLOCK
FEATURES PROVIDEDHUMIDITY PROOF
FRAGILITY FACTORMODERATELY RUGGED
MAXIMUM RUNNING TORQUE6.00 INCH-OUNCES
MAXIMUM STARTING TORQUE6.00 INCH-OUNCES
MAXIMUM STOP TORQUE32.00 INCH-OUNCES
MOUNTING BUSHING LENGTH0.235 INCHES MINIMUM AND 0.265 INCHES MAXIMUM
MOUNTING METHODSTANDARD BUSHING
NONTURN DEVICE RADIUS0.235 INCHES MINIMUM AND 0.265 INCHES MAXIMUM
POWER DISSIPATION RATING PER SECTION IN WATTS0.25 FREE AIR SINGLE SECTION
RELIABILITY INDICATORNOT ESTABLISHED
RESISTANCE TOLERANCE PER SECTION IN PERCENT-10.0 TO 10.0 SINGLE SECTION
ROTARY ACTUATOR TRAVEL IN ANGULAR DEG290.0 MINIMUM AND 300.0 MAXIMUM
SCREW THREAD DIAMETER0.250 INCHES NOMINAL
SCREW THREAD QUANTITY PER INCH32.0
SCREW THREAD SERIES DESIGNATORUNEF
SECTION QUANTITY1
SHAFT DIAMETER0.124 INCHES MINIMUM AND 0.126 INCHES MAXIMUM
SHAFT BEARING TYPESLEEVE
SHAFT LENGTH0.718 INCHES NOMINAL
SHAFT STYLEROUND, STEPPED
TERMINAL LOCATIONLOWER ADJACENT SIDE SINGLE ROW
TERMINAL LENGTH0.140 INCHES MINIMUM AND 0.190 INCHES MAXIMUM
TERMINAL TYPE AND QUANTITY3 PIN
UNDERCUT DIAMETER0.077 INCHES MINIMUM AND 0.079 INCHES MAXIMUM
UNDERCUT LENGTH0.343 INCHES NOMINAL


Click here to Register for Free 30-day Trial

© 2025 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us