|
|
|
National Stock Number:
5905-01-304-5318
Federal Supply Class:
5905
National Item Identification Number:
013045318
Description:
RESISTOR,FIXED,WIRE WOUND,INDUCT
Detail:
INC 37403 REINSTATED ON 010303~A resistor whose ohmic value cannot be adjusted or varied. The resistance element consists of high resistance wire (or ribbon) either wound on an insulated form or constructed so as to be self-supporting. The item must have inherent characteristics of inducing self-inductance. Opposition to current flow is an inherent property of the resistance wire and is manifested by the heat dissipation in the resistor. Excludes SUPPRESSOR, IGNITION INTERFERENCE. See also RESISTOR (1), FIXED, WIRE WOUND, NONINDUCTIVE.
|
Manufacturer Information:
| 12-104-0.2R | 82807 | MILWAUKEE RESISTOR CORPORATION | | 12368321 | 19207 | U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM | | 25959.2-19(6W) | 16119 | GAMBLE CHARLES T INDUSTRIES |
|
Techincal Specification:
| ELECTRICAL RESISTANCE | 0.200 OHMS | | AMBIENT TEMP AT FULL RATED POWER | 100.0 CELSIUS | | BODY DIAMETER | 1.000 INCHES MINIMUM AND 1.380 INCHES MAXIMUM | | BODY LENGTH | 5.994 INCHES MINIMUM AND 6.006 INCHES MAXIMUM | | CUBIC MEASURE | 8.985 CUBIC INCHES | | INCLOSURE TYPE | ENCAPSULATED | | POWER DISSIPATION RATING IN WATTS | 175.000 FREE AIR | | RELIABILITY INDICATOR | NOT ESTABLISHED | | RESISTANCE TOLERANCE IN PERCENT | -10.000 TO 10.000 | | SPECIAL FEATURES | ONE TERMINAL SCREW 8-32 UNC 0.625 IN. LONG AND TWO 8-32 UNC PLAIN BRASS NUTS | | STYLE DESIGNATOR | AXIAL TERMINAL EACH END | | TERMINAL LENGTH | 1.120 INCHES NOMINAL | | TERMINAL TYPE | TAB, SOLDER LUG | | TERMINAL WIDTH | 0.310 INCHES MINIMUM AND 0.440 INCHES MAXIMUM | | TEST DATA DOCUMENT | 19207-12368321 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
|
|