|
|
|
National Stock Number:
5905-01-304-8712
Federal Supply Class:
5905
National Item Identification Number:
013048712
Description:
RESISTOR NETWORK,FIXED,FILM
Detail:
An arrangement of multiple fixed resistive elements or discrete resistors permanently encased, encapsulated, or potted together, to form an inseparable unit. The resistive elements, consisting of a thin layer of conductive material deposited on or fused to an insulating base, usually are electrically connected to each other and may be arranged in any circuit configuration. Excludes RESISTOR, FIXED (as modified); RESISTOR ASSEMBLY; RESISTOR NETWORK, FIXED-VARIABLE; and RESISTOR SET, MATCHED.
|
Manufacturer Information:
| AR0004-005 | 22915 | NORTHROP GRUMMAN CORP ELECTRONIC SYSTEMS DEFENSIVE SYSTEM DIV | | AR0004-005 | 57489 | VISHAY THIN FILM LLC | | C8340102V3403FA | 56427 | CALIFORNIA MICRO DEVICES CORP |
|
Techincal Specification:
| ELECTRICAL RESISTANCE | 340.000 KILOHMS EACH RESISTOR | | AMBIENT TEMP IN DEG CELSIUS AT FULL RATED POWER | 70.0 | | AMBIENT TEMP IN DEG CELSIUS AT ZERO PERCENT RATED POWER | 143.0 | | BODY HEIGHT | 0.200 INCHES MAXIMUM | | BODY LENGTH | 0.784 INCHES MINIMUM AND 0.876 INCHES MAXIMUM | | BODY WIDTH | 0.240 INCHES MINIMUM AND 0.305 INCHES MAXIMUM | | CUBIC MEASURE | 0.053 CUBIC INCHES | | IDENTICAL VALUE RESISTOR QUANTITY | 8 EACH RESISTOR | | INCLOSURE METHOD | ENCAPSULATED | | POWER DISSIPATION RATING IN WATTS | 0.648 TOTAL NETWORK | | RELIABILITY INDICATOR | NOT ESTABLISHED | | RESISTANCE TOLERANCE IN PERCENT | -1.000 TO 1.000 EACH RESISTOR | | SCHEMATIC DIAGRAM DESIGNATOR | ISOLATED ARRAY | | STYLE DESIGNATOR | DUAL INLINE | | TEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS | -10.0 TO 10.0 | | TEMP RANGE OF TEMP COEFFICIENT IN DEG CELSIUS | -55.0 TO 143.0 | | TERMINAL LENGTH | 0.125 INCHES MINIMUM AND 0.150 INCHES MAXIMUM | | TERMINAL QUANTITY | 16 | | TERMINAL TYPE | TAB, SOLDER LUG | | TERMINAL WIDTH | 0.015 INCHES MINIMUM AND 0.022 INCHES MAXIMUM | | TEST DATA DOCUMENT | 22915-AR0004 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
|
|