| ZERO POWER RESISTANCE | 300.000 KILOHMS |
| ZERO POWER RESISTANCE TOLERANCE IN PERCENT AT REFERENCE TEMP | -3.9 TO 3.9 |
| INCLOSURE TYPE | ENCAPSULATED |
| RELIABILITY INDICATOR | NOT ESTABLISHED |
| STYLE DESIGNATOR | SEALED OR COATED BEAD |
| TERMINAL TYPE AND QUANTITY | 2 WIRE LEAD |
| SURFACE TREATMENT | TIN TERMINAL |
| MAXIMUM POWER DISSIPATION RATING | 96.25 MILLIWATTS |
| AMBIENT TEMP AT FULL RATED POWER | 25.0 DEG CELSIUS |
| MAXIMUM OPERATING TEMP | 125.0 DEG CELSIUS |
| THERMAL TIME CONSTANT IN SECONDS | 3.5 |
| POWER DISSIPATION CONSTANT IN MILLIWATTS PER DEG CELSIUS | 0.35 |
| ZERO POWER TEMP COEFFICIENT OF RESISTANCE IN PERCENT PER DEG CELSIUS | -4.90 |
| TEMP POINTS FOR RESISTANCE READINGS AT ZERO POWER | 0.0 DEG CELSIUS 1ST RESISTANCE-TEMPERATURE POINT |
| 50.0 DEG CELSIUS 2ND RESISTANCE-TEMPERATURE POINT |
| 53.6 DEG CELSIUS 3RD RESISTANCE-TEMPERATURE POINT |
| 55.6 DEG CELSIUS 4TH RESISTANCE-TEMPERATURE POINT |
| 57.6 DEG CELSIUS 5TH RESISTANCE-TEMPERATURE POINT |
| 75.0 DEG CELSIUS 6TH RESISTANCE-TEMPERATURE POINT |
| 100.0 DEG CELSIUS 7TH RESISTANCE-TEMPERATURE POINT |
| ZERO POWER RESISTANCE AT SPECIFIED TEMP | 1.1 MEGOHMS 1ST RESISTANCE-TEMPERATURE POINT |
| 98.0 KILOHMS 2ND RESISTANCE-TEMPERATURE POINT |
| 84.4 KILOHMS 3RD RESISTANCE-TEMPERATURE POINT |
| 77.8 KILOHMS 4TH RESISTANCE-TEMPERATURE POINT |
| 71.8 KILOHMS 5TH RESISTANCE-TEMPERATURE POINT |
| 36.7 KILOHMS 6TH RESISTANCE-TEMPERATURE POINT |
| 15.4 KILOHMS 7TH RESISTANCE-TEMPERATURE POINT |
| RESISTANCE TOLERANCE AT A SPECIFIED TEMP IN PERCENT | -6.4 TO 6.4 1ST RESISTANCE-TEMPERATURE POINT |
| -1.4 TO 1.4 2ND RESISTANCE-TEMPERATURE POINT |
| -1.0 TO 1.0 3RD RESISTANCE-TEMPERATURE POINT |
| -1.0 TO 1.0 4TH RESISTANCE-TEMPERATURE POINT |
| -1.0 TO 1.0 5TH RESISTANCE-TEMPERATURE POINT |
| -2.5 TO 2.5 6TH RESISTANCE-TEMPERATURE POINT |
| -4.5 TO 4.5 7TH RESISTANCE-TEMPERATURE POINT |
| BODY LENGTH | 0.070 INCHES MINIMUM AND |
| 0.100 INCHES MAXIMUM |
| BODY OUTSIDE DIAMETER | 0.046 INCHES MAXIMUM |
| TERMINAL LENGTH | 2.000 INCHES MINIMUM |
| TEST DATA DOCUMENT | 88932-104519 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| CUBIC MEASURE | 0.0001 CUBIC INCHES |
| FSC APPLICATION DATA | ELECTRICAL AND ELECTRONIC EQUIPMENT COMPONENTS |