|
|
|
National Stock Number:
5905-01-310-1864
Federal Supply Class:
5905
National Item Identification Number:
013101864
Description:
RESISTOR,VARIABLE,NONWIRE WOUND,
Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus or minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.
|
Manufacturer Information:
| 311-2214-00 | 80009 | TEKTRONIX, INC. | | CM43458 | 12697 | CLAROSTAT SENSORS AND CONTROLS |
|
Techincal Specification:
| ELECTRICAL RESISTANCE PER SECTION | 5.0 KILOHMS ALL SECTIONS | | ACTUATOR TYPE | SINGLE SHAFT | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 70.0 ALL SECTIONS | | BODY HEIGHT | 0.531 INCHES MAXIMUM | | BODY LENGTH | 0.797 INCHES MAXIMUM | | BODY STYLE | RECTANGULAR BUSHING MOUNTED | | BODY WIDTH | 0.531 INCHES MAXIMUM | | FRAGILITY FACTOR | MODERATELY RUGGED | | III CUBIC MEASURE | 0.225 CUBIC INCHES | | POWER DISSIPATION RATING PER SECTION IN WATTS | 0.5 FREE AIR ALL SECTIONS | | PROPRIETARY CHARACTERISTICS | PACS | | MAXIMUM RUNNING TORQUE | 3.50 INCH-OUNCES | | MAXIMUM STARTING TORQUE | 3.50 INCH-OUNCES | | MOUNTING BUSHING LENGTH | 0.235 INCHES MINIMUM AND 0.266 INCHES MAXIMUM | | MOUNTING METHOD | LOCKING BUSHING | | RELIABILITY INDICATOR | NOT ESTABLISHED | | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -20.0/+20.0 ALL SECTIONS | | SECTION QUANTITY | 2 | | SHAFT BEARING TYPE | SLEEVE | | SHAFT DIAMETER | 0.124 INCHES MINIMUM AND 0.126 INCHES MAXIMUM | | SHAFT LENGTH | 0.360 INCHES MINIMUM AND 0.922 INCHES MAXIMUM | | SHAFT STYLE | ROUND, SLOTTED | | TERMINAL LOCATION | LONGITUDINALLY POSITIONED ON THE CIRCUMFERENCE | | TERMINAL TYPE AND QUANTITY | 6 WIRE LOOP |
|
|