|
|
|
National Stock Number:
5905-01-310-5385
Federal Supply Class:
5905
National Item Identification Number:
013105385
Description:
RESISTOR,VARIABLE,NONWIRE WOUND,
Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus or minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.
|
Manufacturer Information:
| 27M796 | 01121 | ROCKWELL AUTOMATION, INC. | | 27M796 | 12697 | CLAROSTAT SENSORS AND CONTROLS | | 311-2394-00 | 80009 | TEKTRONIX, INC. |
|
Techincal Specification:
| ELECTRICAL RESISTANCE PER SECTION | 20.0 KILOHMS ALL SECTIONS | | ACTUATOR TYPE | SINGLE SHAFT | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 70.0 ALL SECTIONS | | BODY HEIGHT | 0.625 INCHES NOMINAL | | BODY LENGTH | 1.469 INCHES NOMINAL | | BODY STYLE | RECTANGULAR BUSHING MOUNTED | | BODY WIDTH | 0.625 INCHES NOMINAL | | CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL | 0.190 INCHES MINIMUM AND 0.210 INCHES MAXIMUM | | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | 0.570 INCHES MINIMUM AND 0.630 INCHES MAXIMUM | | FEATURES PROVIDED | SWITCH | | III CUBIC MEASURE | 0.574 CUBIC INCHES | | III FRAGILITY FACTOR | MODERATELY RUGGED | | POWER DISSIPATION RATING PER SECTION IN WATTS | 0.25 FREE AIR ALL SECTIONS | | PROPRIETARY CHARACTERISTICS | PACS | | MOUNTING BUSHING LENGTH | 0.234 INCHES MINIMUM AND 0.266 INCHES MAXIMUM | | MOUNTING METHOD | LOCKING BUSHING | | RELIABILITY INDICATOR | NOT ESTABLISHED | | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -20.0 TO 20.0 ALL SECTIONS | | SCREW THREAD DIAMETER | 0.250 INCHES NOMINAL | | SCREW THREAD QUANTITY PER INCH | 32.0 | | SCREW THREAD SERIES DESIGNATOR | UNEF | | SECTION QUANTITY | 2 | | SHAFT BEARING TYPE | SLEEVE | | SHAFT DIAMETER | 0.124 INCHES MINIMUM AND 0.126 INCHES MAXIMUM | | SHAFT LENGTH | 0.719 INCHES MINIMUM AND 0.781 INCHES MAXIMUM | | SHAFT STYLE | ROUND, SLOTTED | | SWITCH TYPE | PUSH-PULL | | SWITCH CONTACT ARRANGEMENT | SINGLE POLE, SINGLE THROW, NORMALLY OPEN, BOTH POSITIONS MAINTAINED | | TERMINAL LOCATION | LONGITUDINALLY POSITIONED ON THE CIRCUMFERENCE | | TERMINAL LENGTH | 0.500 INCHES NOMINAL | | TERMINAL TYPE AND QUANTITY | 4 PIN AND 4 TAB, SOLDER LUG |
|
|