5905-01-310-9605 RESISTOR,FIXED,WIRE WOUND Index 5306-01-310-9607 BOLT,MACHINE

National Stock Number:
5905-01-310-9606

Federal Supply Class:
5905

National Item Identification Number:
013109606

Description:
RESISTOR,VARIABLE,NONWIRE WOUND,

Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The finctional tolerance (linearity) of the output is equal to or less than plus or minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually postioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see REHOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE NONWIRE WOUND, NONPRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.


Manufacturer Information:
MIL-PRF-39023/181349MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
MIL-R-39023/181349MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
RQ090AC11DC50281349MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M


Techincal Specification:
ACTUATOR TRAVEL CONTROL FEATURECONTINUOUS MOTION
ACTUATOR TYPESINGLE SHAFT
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER70.0 SINGLE SECTION
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER125.0 SINGLE SECTION
BODY DIAMETER1.062 INCHES MAXIMUM
BODY LENGTH1.306 INCHES MAXIMUM
BODY STYLECYLINDRICAL SERVO MOUNTED
CUBIC MEASURE0.091 CUBIC INCHES
EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION360.0 NOMINAL
ELECTRICAL RESISTANCE PER SECTION5.0 KILOHMS SINGLE SECTION
FRAGILITY FACTORMODERATELY RUGGED
FUNCTION CHARACTERISTIC PER SECTIONSINGLE SECTION LINEAR
FUNCTION CONFORMITY PER SECTIONSINGLE SECTION INDEPENDENT LINEARITY
FUNCTION CONFORMITY TOLERANCE PER SECTION-0.10 TO 0.10 SINGLE SECTION
LATERAL RUNOUT0.002 INCHES
PILOT LENGTH0.0570 INCHES MINIMUM AND 0.0670 INCHES MAXIMUM
PILOT DIAMETER RUNOUT0.001 INCHES
PILOT DIAMETER0.7495 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM
MAXIMUM RUNNING TORQUE0.40 INCH-OUNCES
MAXIMUM STARTING TORQUE0.50 INCH-OUNCES
MECHANICAL BACKLASH IN DEG ANGULAR ROTATION0.1
MOUNTING LIP DEPTH0.0570 INCHES MINIMUM AND 0.0670 INCHES MAXIMUM
MOUNTING LIP DIAMETER0.8650 INCHES MINIMUM AND 0.8800 INCHES MAXIMUM
MOUNTING METHODCLAMP
POWER DISSIPATION RATING PER SECTION IN WATTS1.0 FREE AIR SINGLE SECTION
RELIABILITY INDICATORNOT ESTABLISHED
RESISTANCE TOLERANCE PER SECTION IN PERCENT-0.1 TO 0.1 SINGLE SECTION
ROTARY ACTUATOR TRAVEL IN ANGULAR DEG360.0 NOMINAL
SECTION QUANTITY1
SHAFT LENGTH0.594 INCHES MINIMUM AND 0.656 INCHES MAXIMUM
SHAFT DIAMETER0.124 INCHES MINIMUM AND 0.125 INCHES MAXIMUM
SHAFT END PLAY0.005 INCHES
SHAFT RADIAL PLAY0.001 INCHES
SHAFT RUNOUT0.002 INCHES
SHAFT STYLEROUND
SPECIFICATION/STANDARD DATA81349-MIL-R-39023/1 GOVERNMENT SPECIFICATION
TERMINAL LOCATIONRADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE
TERMINAL TYPE AND QUANTITY3 TURRET
TEST DATA DOCUMENT81349-MIL-R-39023 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
UNDERCUT DIAMETER0.906 INCHES MAXIMUM
UNDERCUT WIDTH0.0570 INCHES MINIMUM


Click here to Register for Free 30-day Trial

© 2025 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us