|
|
|
National Stock Number:
5905-01-313-2082
Federal Supply Class:
5905
National Item Identification Number:
013132082
Description:
RESISTOR,VARIABLE,NONWIRE WOUND,
Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus or minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.
|
Manufacturer Information:
| 311-2344-00 | 71590 | CRL COMPONENTS INC | | 311-2344-00 | 80009 | TEKTRONIX, INC. |
|
Techincal Specification:
| EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 287.5 MINIMUM AND 292.5 MAXIMUM | | ELECTRICAL RESISTANCE PER SECTION | 4.7 KILOHMS SINGLE SECTION | | ACTUATOR TYPE | FLUSH DRIVE WITH SLOT-HOLE | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 40.0 SINGLE SECTION | | BODY HEIGHT | 0.665 INCHES MINIMUM AND 0.673 INCHES MAXIMUM | | BODY LENGTH | 0.443 INCHES MINIMUM AND 0.463 INCHES MAXIMUM | | BODY STYLE | RECTANGULAR | | BODY WIDTH | 0.665 INCHES MINIMUM AND 0.673 INCHES MAXIMUM | | CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL | 0.090 INCHES MINIMUM AND 0.110 INCHES MAXIMUM | | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | 0.180 INCHES MINIMUM AND 0.220 INCHES MAXIMUM | | FEATURES PROVIDED | HUMIDITY PROOF | | III CUBIC MEASURE | 0.208 CUBIC INCHES | | III FRAGILITY FACTOR | MODERATELY RUGGED | | POWER DISSIPATION RATING PER SECTION IN WATTS | 1.25 FREE AIR SINGLE SECTION | | PROPRIETARY CHARACTERISTICS | PACS | | MAXIMUM RUNNING TORQUE | 2.50 INCH-OUNCES | | MAXIMUM STARTING TORQUE | 2.50 INCH-OUNCES | | MOUNTING METHOD | TERMINAL | | RELIABILITY INDICATOR | NOT ESTABLISHED | | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -20.0 TO 20.0 SINGLE SECTION | | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 298.0 MINIMUM AND 302.0 MAXIMUM | | SECTION QUANTITY | 1 | | SHAFT BEARING TYPE | BEARING | | TERMINAL LOCATION | REAR END | | TERMINAL LENGTH | 0.150 INCHES NOMINAL | | TERMINAL TYPE AND QUANTITY | 3 PIN |
|
|