| ZERO POWER RESISTANCE | 1.000 KILOHMS |
| ZERO POWER RESISTANCE TOLERANCE IN PERCENT AT REFERENCE TEMP | -1.0 TO 1.0 |
| INCLOSURE TYPE | ENCAPSULATED |
| RELIABILITY INDICATOR | NOT ESTABLISHED |
| STYLE DESIGNATOR | SPHERICAL |
| TERMINAL TYPE AND QUANTITY | 2 WIRE LEAD |
| SURFACE TREATMENT | SOLDER TERMINAL |
| MAXIMUM POWER DISSIPATION RATING | 1.00 WATTS |
| AMBIENT TEMP AT FULL RATED POWER | 25.0 DEG CELSIUS |
| MAXIMUM OPERATING TEMP | 125.0 DEG CELSIUS |
| THERMAL TIME CONSTANT IN SECONDS | 250.0 |
| POWER DISSIPATION CONSTANT IN MILLIWATTS PER DEG CELSIUS | 10.0 |
| ZERO POWER TEMP COEFFICIENT OF RESISTANCE IN PERCENT PER DEG CELSIUS | 10.00 |
| TEMP POINTS FOR RESISTANCE READINGS AT ZERO POWER | -55.0 DEG CELSIUS 1ST RESISTANCE-TEMPERATURE POINT |
| -15.0 DEG CELSIUS 2ND RESISTANCE-TEMPERATURE POINT |
| 0.0 DEG CELSIUS 3RD RESISTANCE-TEMPERATURE POINT |
| 50.0 DEG CELSIUS 4TH RESISTANCE-TEMPERATURE POINT |
| 75.0 DEG CELSIUS 5TH RESISTANCE-TEMPERATURE POINT |
| 100.0 DEG CELSIUS 6TH RESISTANCE-TEMPERATURE POINT |
| 125.0 DEG CELSIUS 7TH RESISTANCE-TEMPERATURE POINT |
| ZERO POWER RESISTANCE AT SPECIFIED TEMP | 100.0 KILOHMS 1ST RESISTANCE-TEMPERATURE POINT |
| 7.38 KILOHMS 2ND RESISTANCE-TEMPERATURE POINT |
| 3.27 KILOHMS 3RD RESISTANCE-TEMPERATURE POINT |
| 360.0 OHMS 4TH RESISTANCE-TEMPERATURE POINT |
| 148.0 OHMS 5TH RESISTANCE-TEMPERATURE POINT |
| 67.5 OHMS 6TH RESISTANCE-TEMPERATURE POINT |
| 34.0 OHMS 7TH RESISTANCE-TEMPERATURE POINT |
| RESISTANCE TOLERANCE AT A SPECIFIED TEMP IN PERCENT | -10.0 TO 10.0 1ST RESISTANCE-TEMPERATURE POINT |
| -5.0 TO 5.0 2ND RESISTANCE-TEMPERATURE POINT |
| -3.0 TO 3.0 3RD RESISTANCE-TEMPERATURE POINT |
| -3.0 TO 3.0 4TH RESISTANCE-TEMPERATURE POINT |
| -5.0 TO 5.0 5TH RESISTANCE-TEMPERATURE POINT |
| -7.0 TO 7.0 6TH RESISTANCE-TEMPERATURE POINT |
| -10.0 TO 10.0 7TH RESISTANCE-TEMPERATURE POINT |
| BODY OUTSIDE DIAMETER | 1.460 INCHES MINIMUM AND |
| 1.580 INCHES MAXIMUM |
| BODY WIDTH | 0.360 INCHES MAXIMUM |
| TERMINAL LENGTH | 1.500 INCHES MINIMUM |
| TERMINAL DIAMETER | 0.022 INCHES MINIMUM AND |
| 0.028 INCHES MAXIMUM |
| TEST DATA DOCUMENT | 81349-MIL-T-23648 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| SPECIFICATION/STANDARD DATA | 81349-MIL-T-23648/2 GOVERNMENT SPECIFICATION |
| REFERENCE TEMP IN DEG CELSIUS | 25.0 |
| SPEC/STD CONTROLLING DATA | |
| MANUFACTURERS CODE | 81349 |
| NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | MIL-PRF-23648/2 |
| DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | RTH08BS102F |