| EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 360.0 NOMINAL |
| ELECTRICAL RESISTANCE PER SECTION | 5.0 KILOHMS SINGLE SECTION |
| ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION |
| ACTUATOR TYPE | SINGLE SHAFT |
| AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 70.0 SINGLE SECTION |
| AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 125.0 SINGLE SECTION |
| BODY DIAMETER | 0.906 INCHES MAXIMUM |
| BODY LENGTH | 0.810 INCHES MAXIMUM |
| BODY STYLE | CYLINDRICAL SERVO MOUNTED |
| FIXED TAP QUANTITY PER SECTION | 1 SINGLE SECTION |
| FUNCTION CHARACTERISTIC PER SECTION | SINGLE SECTION LINEAR |
| FUNCTION CONFORMITY PER SECTION | SINGLE SECTION INDEPENDENT LINEARITY |
| FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.25 TO 0.25 SINGLE SECTION |
| III FRAGILITY FACTOR | MODERATELY RUGGED |
| PILOT DIAMETER | 0.7495 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM |
| PILOT LENGTH | 0.0570 INCHES MINIMUM AND 0.0670 INCHES MAXIMUM |
| POWER DISSIPATION RATING PER SECTION IN WATTS | 1.0 FREE AIR SINGLE SECTION |
| PROPRIETARY CHARACTERISTICS | PACS |
| MAXIMUM RUNNING TORQUE | 0.40 INCH-OUNCES |
| MAXIMUM STARTING TORQUE | 0.50 INCH-OUNCES |
| MOUNTING LIP DEPTH | 0.0570 INCHES MINIMUM AND 0.0670 INCHES MAXIMUM |
| MOUNTING LIP DIAMETER | 0.8650 INCHES MINIMUM AND 0.8800 INCHES MAXIMUM |
| MOUNTING METHOD | CLAMP RING |
| RELIABILITY INDICATOR | NOT ESTABLISHED |
| RESISTANCE TOLERANCE PER SECTION IN PERCENT | -5.0 TO 5.0 SINGLE SECTION |
| ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 360.0 NOMINAL |
| SECTION QUANTITY | 1 |
| SHAFT END PLAY | 0.005 INCHES |
| SHAFT DIAMETER | 0.1245 INCHES MINIMUM AND 0.125 INCHES MAXIMUM |
| SHAFT LENGTH | 0.880 INCHES NOMINAL |
| SHAFT STYLE | ROUND, SLOTTED |
| TAP LOCATION FROM CCW TERMINAL PER SECTION IN OHMS | 2500.0 SINGLE SECTION |
| TAP LOCATION TOLERANCE PER SECTION | -125.0 TO 125.0 OHMS SINGLE SECTION |
| TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| TERMINAL TYPE AND QUANTITY | 4 TURRET |
| TEST DATA DOCUMENT | 03956-1809013 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| UNDERCUT DIAMETER | 0.781 INCHES MAXIMUM |
| UNDERCUT WIDTH | 0.0570 INCHES MINIMUM |