5905-01-332-7974, RESISTOR,VARIABLE,NONWIRE WOUND,

5905-01-332-7973 RESISTOR,FIXED,WIRE WOUND,INDUCT

National Stock Number:
5905-01-332-7974

Federal Supply Class:
5905

National Item Identification Number:
013327974

Description:
RESISTOR,VARIABLE,NONWIRE WOUND,

Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus or minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.

Manufacturer Information:

MIL-PRF-94/4	81349	MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
MIL-R-94/4	81349	MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
RV2SAYFD503A	81349	MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M

Techincal Specification:

EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION	251.0 MINIMUM AND 318.0 MAXIMUM
ELECTRICAL RESISTANCE PER SECTION	50.0 KILOHMS SINGLE SECTION
ACTUATOR TRAVEL CONTROL FEATURE	STOPS
ACTUATOR TYPE	SINGLE SHAFT
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER	70.0 SINGLE SECTION
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER	120.0 SINGLE SECTION
BODY DIAMETER	0.844 INCHES MINIMUM AND 0.968 INCHES MAXIMUM
BODY LENGTH	0.391 INCHES MINIMUM AND 0.609 INCHES MAXIMUM
BODY STYLE	CYLINDRICAL BUSHING MOUNTED
CUBIC MEASURE	0.322 CUBIC INCHES
DEVICE DESIGN TYPE	NONTURN AT 9 OCLOCK
FEATURES PROVIDED	HUMIDITY PROOF AND SHAFT SEAL
FRAGILITY FACTOR	MODERATELY RUGGED
MAXIMUM RUNNING TORQUE	6.00 INCH-OUNCES
MAXIMUM STARTING TORQUE	6.00 INCH-OUNCES
MAXIMUM STOP TORQUE	128.00 INCH-OUNCES
MOUNTING BUSHING LENGTH	0.360 INCHES MINIMUM AND 0.432 INCHES MAXIMUM
MOUNTING METHOD	STANDARD BUSHING
NONTURN DEVICE RADIUS	0.376 INCHES MINIMUM AND 0.500 INCHES MAXIMUM
POWER DISSIPATION RATING PER SECTION IN WATTS	1.0 FREE AIR SINGLE SECTION
RELIABILITY INDICATOR	NOT ESTABLISHED
RESISTANCE TOLERANCE PER SECTION IN PERCENT	-10.0 TO 10.0 SINGLE SECTION
RESISTANCE TEMP CHARACTERISTIC RANGE PER SECTION IN PERCENT	-3.0 TO 0.0 -55 DEG CELSIUS SINGLE SECTION AND -5.0 TO 10.0 -25 DEG CELSIUS SINGLE SECTION AND -5.0 TO 10.0 25 DEG CELSIUS SINGLE SECTION AND +0.0 TO 3.0 120 DEG CELSIUS SINGLE SECTION
ROTARY ACTUATOR TRAVEL IN ANGULAR DEG	251.0 MINIMUM AND 318.0 MAXIMUM
SCREW THREAD DIAMETER	0.375 INCHES NOMINAL
SCREW THREAD QUANTITY PER INCH	32.0
SCREW THREAD SERIES DESIGNATOR	UNEF
SECTION QUANTITY	1
SHAFT DIAMETER	0.248 INCHES MINIMUM AND 0.251 INCHES MAXIMUM
SHAFT BEARING TYPE	SLEEVE
SHAFT LENGTH	0.844 INCHES MINIMUM AND 0.906 INCHES MAXIMUM
SHAFT STYLE	ROUND
SPECIFICATION/STANDARD DATA	81349-MIL-R-94/4 GOVERNMENT SPECIFICATION
TERMINAL LOCATION	RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE
TERMINAL TYPE AND QUANTITY	3 TAB, SOLDER LUG
TEST DATA DOCUMENT	81349-MIL-R-94 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).

Click here to Register for Free 30-day Trial