|
|
|
National Stock Number:
5905-01-335-4342
Federal Supply Class:
5905
National Item Identification Number:
013354342
Description:
RESISTOR,VARIABLE,WIRE WOUND,PRE
Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity) of the output is equal to or less than plus or munus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE, For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, NONWIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND, PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION.
|
Manufacturer Information:
| 15064 | 04454 | SENSOR SYSTEMS, L.L.C. | | 15064 | 10112 | GENERAL DYNAMICS MOTION CONTROL LLC | | LM15064 | 04454 | SENSOR SYSTEMS, L.L.C. | | 28C1-2864 | 19176 | SERVO INSTRUMENT CORPORATION | | 70901-02002-109 | 78286 | SIKORSKY AIRCRAFT CORPORATION |
|
Techincal Specification:
| ELECTRICAL RESISTANCE PER SECTION | 10.0 MEGOHMS SINGLE SECTION | | ACTUATOR TYPE | SINGLE SHAFT | | BODY DIAMETER | 1.770 INCHES MAXIMUM | | BODY LENGTH | 1.000 INCHES MAXIMUM | | BODY STYLE | CYLINDRICAL SERVO MOUNTED | | PILOT DIAMETER | 1.5590 INCHES MINIMUM AND 1.5620 INCHES MAXIMUM | | PILOT LENGTH | 0.0600 INCHES NOMINAL | | PROPRIETARY CHARACTERISTICS | PACS | | MOUNTING LIP DEPTH | 0.0600 INCHES NOMINAL | | MOUNTING LIP DIAMETER | 1.7700 INCHES MAXIMUM | | MOUNTING METHOD | CLAMP RING | | NONTURN DEVICE LOCATION | AT 6 OCLOCK | | NONTURN DEVICE RADIUS | 0.495 INCHES MINIMUM AND 0.505 INCHES MAXIMUM | | RELIABILITY INDICATOR | NOT ESTABLISHED | | SECTION QUANTITY | 1 | | SHAFT DIAMETER | 0.2495 INCHES MINIMUM AND 0.250 INCHES MAXIMUM | | SHAFT LENGTH | 0.750 INCHES NOMINAL | | SHAFT STYLE | ROUND, SLOTTED | | TERMINAL LOCATION | LOWER ADJACENT SIDE SINGLE ROW | | TERMINAL TYPE AND QUANTITY | 1 CONNECTOR, RECEPTACLE | | UNDERCUT DIAMETER | 1.625 INCHES MAXIMUM | | UNDERCUT WIDTH | 0.0600 INCHES NOMINAL |
|
|