|
|
|
National Stock Number:
5905-01-337-0280
Federal Supply Class:
5905
National Item Identification Number:
013370280
Description:
RESISTOR,VARIABLE,NONWIRE WOUND,
Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus or minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.
|
Manufacturer Information:
| 3386S-1-504-T | 80294 | BOURNS INSTRUMENTS INC | | 851683 | 89536 | FLUKE CORP |
|
Techincal Specification:
| ELECTRICAL RESISTANCE PER SECTION | 500.0 KILOHMS SINGLE SECTION | | ACTUATOR TRAVEL CONTROL FEATURE | STOPS | | ACTUATOR TYPE | RECESSED DRIVE WITH SLOT | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 70.0 SINGLE SECTION | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 125.0 SINGLE SECTION | | BODY HEIGHT | 0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM | | BODY LENGTH | 0.190 INCHES NOMINAL | | BODY STYLE | RECTANGULAR | | BODY WIDTH | 0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM | | CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL | 0.150 INCHES NOMINAL | | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | 0.300 INCHES NOMINAL | | CUBIC MEASURE | 0.028 CUBIC INCHES | | FEATURES PROVIDED | HUMIDITY PROOF | | FRAGILITY FACTOR | MODERATELY RUGGED | | MAXIMUM RUNNING TORQUE | 5.00 INCH-OUNCES | | MAXIMUM STARTING TORQUE | 5.00 INCH-OUNCES | | MOUNTING METHOD | TERMINAL | | POWER DISSIPATION RATING PER SECTION IN WATTS | 0.5 FREE AIR SINGLE SECTION | | RELIABILITY INDICATOR | NOT ESTABLISHED | | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0 TO 10.0 SINGLE SECTION | | SECTION QUANTITY | 1 | | SHAFT BEARING TYPE | BEARING | | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -100.0 TO 100.0 SINGLE SECTION | | TERMINAL LOCATION | LOWER ADJACENT SIDE SINGLE ROW | | TERMINAL LENGTH | 0.200 INCHES MINIMUM | | TERMINAL TYPE AND QUANTITY | 3 PIN |
|
|