| ELECTRICAL RESISTANCE | 19.500 OHMS LOWEST RESISTANCE VALUE10.000 KILOHMS HIGHEST RESISTANCE VALUE750.000 OHMS 1ST INTERMEDIATE RESISTANCE VALUE1.100 KILOHMS 2ND INTERMEDIATE RESISTANCE VALUE |
| AMBIENT TEMP IN DEG CELSIUS AT FULL RATED POWER | 70.0 |
| AMBIENT TEMP IN DEG CELSIUS AT ZERO PERCENT RATED POWER | 125.0 |
| BODY HEIGHT | 0.180 INCHES MAXIMUM |
| BODY LENGTH | 0.695 INCHES MINIMUM AND 0.785 INCHES MAXIMUM |
| BODY WIDTH | 0.240 INCHES MINIMUM AND 0.305 INCHES MAXIMUM |
| IDENTICAL VALUE RESISTOR QUANTITY | 2 LOWEST RESISTANCE VALUE2 HIGHEST RESISTANCE VALUE2 1ST INTERMEDIATE RESISTANCE VALUE2 2ND INTERMEDIATE RESISTANCE VALUE |
| INCLOSURE METHOD | ENCAPSULATED |
| POWER DISSIPATION RATING IN WATTS | 0.100 TOTAL NETWORK |
| RELIABILITY INDICATOR | NOT ESTABLISHED |
| RESISTANCE TOLERANCE IN PERCENT | -5.000 TO 5.000 LOWEST RESISTANCE VALUE-1.000 TO 1.000 HIGHEST RESISTANCE VALUE-1.000 TO 1.000 1ST INTERMEDIATE RESISTANCE VALUE-1.000 TO 1.000 2ND INTERMEDIATE RESISTANCE VALUE |
| SCHEMATIC DIAGRAM DESIGNATOR | SERIES NETWORK |
| SPECIFICATION/STANDARD DATA | 09128-34087785 MANUFACTURERS SOURCE CONTROL |
| STYLE DESIGNATOR | DUAL INLINE |
| TEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS | -300.0 TO 300.0 |
| TEMP RANGE OF TEMP COEFFICIENT IN DEG CELSIUS | -55.0 TO 125.0 |
| TERMINAL LENGTH | 0.105 INCHES MINIMUM AND 0.215 INCHES MAXIMUM |
| TERMINAL QUANTITY | 12 |
| TERMINAL TYPE | TAB, SOLDER LUG |
| TERMINAL WIDTH | 0.015 INCHES MINIMUM AND 0.220 INCHES MAXIMUM |
| TEST DATA DOCUMENT | 09128-34087785 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |