|
|
|
National Stock Number:
5905-01-359-0234
Federal Supply Class:
5905
National Item Identification Number:
013590234
Description:
RESISTOR NETWORK,FIXED,FILM
Detail:
An arrangement of multiple fixed resistive elements or discrete resistors permanently encased, encapsulated, or potted together, to form an inseparable unit. The resistive elements, consisting of a thin layer of conductive material deposited on or fused to an insulating base, usually are electrically connected to each other and may be arranged in any circuit configuration. Excludes RESISTOR, FIXED (as modified); RESISTOR ASSEMBLY; RESISTOR NETWORK, FIXED-VARIABLE; and RESISTOR SET, MATCHED.
|
Manufacturer Information:
| 34058414-011 | 09128 | HONEYWELL INTERNATIONAL INC. | | 34058414-011 | 57027 | INTERNATIONAL RESISTIVE COMPANY OF TEXAS, LLC | | 34058414-011 | 91637 | VISHAY DALE ELECTRONICS, LLC |
|
Techincal Specification:
| ELECTRICAL RESISTANCE | 511.000 KILOHMS EACH RESISTOR | | AMBIENT TEMP IN DEG CELSIUS AT FULL RATED POWER | 70.0 | | AMBIENT TEMP IN DEG CELSIUS AT ZERO PERCENT RATED POWER | 125.0 | | BODY HEIGHT | 0.177 INCHES MINIMUM AND 0.197 INCHES MAXIMUM | | BODY LENGTH | 0.968 INCHES MINIMUM AND 0.998 INCHES MAXIMUM | | BODY WIDTH | 0.050 INCHES MINIMUM AND 0.103 INCHES MAXIMUM | | IDENTICAL VALUE RESISTOR QUANTITY | 4 EACH RESISTOR | | INCLOSURE METHOD | ENCAPSULATED | | MIL-STD-1276 WIRE LEAD TYPE DESIGNATOR | N | | POWER DISSIPATION RATING IN WATTS | 0.200 EACH RESISTOR | | RELIABILITY INDICATOR | NOT ESTABLISHED | | RESISTANCE TOLERANCE IN PERCENT | -1.000 TO 1.000 EACH RESISTOR | | SCHEMATIC DIAGRAM DESIGNATOR | LADDER NETWORK | | SPECIFICATION/STANDARD DATA | 09128-34058414 MANUFACTURERS SOURCE CONTROL | | STYLE DESIGNATOR | SINGLE INLINE | | TEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS | -100.0 TO 100.0 | | TEMP RANGE OF TEMP COEFFICIENT IN DEG CELSIUS | -55.0 TO 125.0 | | TERMINAL LENGTH | 0.125 INCHES MINIMUM AND 0.150 INCHES MAXIMUM | | TERMINAL QUANTITY | 5 | | TERMINAL TYPE | PIN | | TEST DATA DOCUMENT | 09128-34058414 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
|
|