|
|
|
National Stock Number:
5905-01-463-1754
Federal Supply Class:
5905
National Item Identification Number:
014631754
Description:
RESISTOR,VARIABLE,WIRE WOUND,NON
Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus of minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, NONWIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND, PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.
|
Manufacturer Information:
| 7233R10KL-05CT | 73138 | BI TECHNOLOGIES CORPORATION |
|
Techincal Specification:
| ELECTRICAL RESISTANCE PER SECTION | 10.0 KILOHMS ALL SECTIONS | | ACTUATOR TYPE | SINGLE SHAFT | | ANGLE BETWEEN CENTERLINES OF MOUNTING HOLES IN DEG | 15.9 | | ANGLE OF MOUNTING HOLE IN DEG | 15.9 | | BODY LENGTH | 39.6 MILLIMETERS MINIMUM AND 40.1 MILLIMETERS MAXIMUM | | BODY STYLE | CYLINDRICAL SERVO MOUNTED | | MOUNTING FACILITY QUANTITY | 3 | | MOUNTING HOLE/STUD CIRCLE DIAMETER | 15.850 MILLIMETERS MINIMUM AND 15.875 MILLIMETERS MAXIMUM | | MOUNTING LIP DEPTH | 1.5 MILLIMETERS MINIMUM AND 1.7 MILLIMETERS MAXIMUM | | MOUNTING LIP DIAMETER | 22.1 MILLIMETERS MINIMUM AND 22.3 MILLIMETERS MAXIMUM | | MOUNTING METHOD | UNTHREADED HOLE | | PILOT DIAMETER | 15.850 MILLIMETERS MINIMUM AND 15.875 MILLIMETERS MAXIMUM | | PILOT LENGTH | 1.5 MILLIMETERS MINIMUM AND 1.7 MILLIMETERS MAXIMUM | | POWER DISSIPATION RATING PER SECTION IN WATTS | 2.0 FREE AIR ALL SECTIONS | | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -3.0 TO 3.0 ALL SECTIONS | | SECTION QUANTITY | 2 | | SHAFT LENGTH | 8.7 MILLIMETERS MINIMUM AND 10.3 MILLIMETERS MAXIMUM | | SHAFT STYLE | ROUND | | UNDERCUT DIAMETER | 21.8 MILLIMETERS MINIMUM AND 22.6 MILLIMETERS MAXIMUM | | UNDERCUT WIDTH | 1.6 MILLIMETERS NOMINAL |
|
|