|
|
|
National Stock Number:
5905-01-463-2663
Federal Supply Class:
5905
National Item Identification Number:
014632663
Description:
RESISTOR,FIXED,FILM
Detail:
A resistor whose ohmic value cannot be adjusted or varied. The resistance element consists of either a thin layer of conductive material, containing either binders or insulating materials, deposited on an insulated form; or an alloy of metal and ceramic materials, usually fused to an insulated form. Opposition to the flow of current is an inherent property of the materials used and is manifest by the heat dissipation in the resistor. See also ATTENUATOR, FIXED and RESISTOR, FIXED, COMPOSITION. Excludes carbon composition type resistors.
|
Manufacturer Information:
| 348A1200P61 | 89954 | BAE SYSTEMS CONTROLS INC. | | H1005CPX4993F10 | 56235 | STATE OF THE ART, INC. | | H1206CPX4993F10(GE200) | 56235 | STATE OF THE ART, INC. | | PTN1005K4993FB | 57489 | VISHAY THIN FILM LLC | | PTN1206K4993FB | 57489 | VISHAY THIN FILM LLC | | RCWP-1206-63K4933F | 91637 | VISHAY DALE ELECTRONICS, LLC |
|
Techincal Specification:
| ELECTRICAL RESISTANCE | 499.000 KILOHMS | | AMBIENT TEMP AT FULL RATED POWER | 70.0 CELSIUS | | AMBIENT TEMP IN DEG CELSIUS AT ZERO PERCENT RATED POWER | 150.0 | | BODY HEIGHT | 0.057 INCHES MINIMUM AND 0.073 INCHES MAXIMUM | | BODY LENGTH | 0.121 INCHES MINIMUM AND 0.142 INCHES MAXIMUM | | BODY WIDTH | 0.039 INCHES MAXIMUM | | INCLOSURE TYPE | UNINCLOSED | | POWER DISSIPATION RATING IN WATTS | 0.100 FREE AIR | | RELIABILITY INDICATOR | NOT ESTABLISHED | | RESISTANCE TOLERANCE IN PERCENT | -1.000 TO 1.000 | | STYLE DESIGNATOR | TERMINATION PAD EACH END | | TEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS | -100.0 TO 100.0 | | TEMP RANGE OF TEMP COEFFICIENT IN DEG CELSIUS | -65.0 TO 150.0 | | TERMINAL LENGTH | 0.010 INCHES MINIMUM AND 0.030 INCHES MAXIMUM | | TERMINAL TYPE | TERMINAL TYPE PER BODY STYLE | | TEST DATA DOCUMENT | 89954-348A1200 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
|
|