|
|
|
National Stock Number:
5905-01-468-1961
Federal Supply Class:
5905
National Item Identification Number:
014681961
Description:
RESISTOR,VARIABLE,NONWIRE WOUND,
Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The finctional tolerance (linearity) of the output is equal to or less than plus or minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually postioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see REHOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE NONWIRE WOUND, NONPRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.
|
Manufacturer Information:
| 144A8702P1 | 89954 | BAE SYSTEMS CONTROLS INC. | | 78FL1-179 | 08815 | HONEYWELL INTERNATIONAL INC |
|
Techincal Specification:
| ACTUATOR TYPE | SINGLE SHAFT | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 125.0 SINGLE SECTION | | BEARING TYPE | BALL SHAFT | | BODY DIAMETER | 0.875 INCHES NOMINAL | | BODY LENGTH | 0.435 INCHES MAXIMUM | | BODY STYLE | CYLINDRICAL SERVO MOUNTED | | ELECTRICAL RESISTANCE PER SECTION | 1.000 KILOHMS SINGLE SECTION | | LATERAL RUNOUT | 0.001 INCHES | | PILOT LENGTH | 0.0620 INCHES NOMINAL | | PILOT DIAMETER RUNOUT | 0.001 INCHES | | PILOT DIAMETER | 0.7495 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM | | MAXIMUM RUNNING TORQUE | 0.27 INCH-OUNCES | | MAXIMUM STARTING TORQUE | 0.27 INCH-OUNCES | | MOUNTING LIP DEPTH | 0.0620 INCHES NOMINAL | | MOUNTING METHOD | CLAMP RING | | RELIABILITY INDICATOR | NOT ESTABLISHED | | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0 TO 10.0 SINGLE SECTION | | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 360.0 NOMINAL | | SECTION QUANTITY | 1 | | SHAFT DIAMETER | 0.1247 INCHES MAXIMUM | | SHAFT END PLAY | 0.005 INCHES | | SHAFT RUNOUT | 0.001 INCHES | | SHAFT STYLE | ROUND, SLOTTED | | TERMINAL TYPE AND QUANTITY | 3 TURRET | | UNDERCUT DIAMETER | 0.750 INCHES MAXIMUM | | UNDERCUT WIDTH | 0.0620 INCHES NOMINAL |
|
|