|
|
|
National Stock Number:
5905-01-482-4902
Federal Supply Class:
5905
National Item Identification Number:
014824902
Description:
RESISTOR,VARIABLE,WIRE WOUND,PRE
Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity) of the output is equal to or less than plus or munus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE, For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, NONWIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND, PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION.
|
Manufacturer Information:
| 3585S-1-103 | 32997 | BOURNS INC | | 3585S-1-103 | 57924 | BOURNS INC INTEGRATED TECHNOLOGIES DIV |
|
Techincal Specification:
| ELECTRICAL RESISTANCE PER SECTION | 10000.0 OHMS SINGLE SECTION | | ACTUATOR TYPE | SINGLE SHAFT | | BODY DIAMETER | 0.875 INCHES NOMINAL | | BODY LENGTH | 0.666 INCHES MINIMUM AND 0.696 INCHES MAXIMUM | | BODY STYLE | CYLINDRICAL SERVO MOUNTED | | LATERAL RUNOUT | 0.002 INCHES | | MAXIMUM RUNNING TORQUE | 0.10 INCH-OUNCES | | MAXIMUM STARTING TORQUE | 0.10 INCH-OUNCES | | MOUNTING LIP DEPTH | 0.0620 INCHES NOMINAL | | MOUNTING LIP DIAMETER | 0.8750 INCHES NOMINAL | | MOUNTING METHOD | CLAMP RING | | PILOT DIAMETER RUNOUT | 0.0015 INCHES | | PILOT DIAMETER | 0.7495 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM | | PILOT LENGTH | 0.0620 INCHES NOMINAL | | POWER DISSIPATION RATING PER SECTION IN WATTS | 1.0 FREE AIR SINGLE SECTION | | RELIABILITY INDICATOR | NOT ESTABLISHED | | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -3.0 TO 3.0 SINGLE SECTION | | SECTION QUANTITY | 1 | | SHAFT END PLAY | 0.003 INCHES | | SHAFT DIAMETER | 0.1245 INCHES MINIMUM AND 0.1251 INCHES MAXIMUM | | SHAFT RADIAL PLAY | 0.002 INCHES | | SHAFT LENGTH | 0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM | | SHAFT RUNOUT | 0.003 INCHES | | SHAFT STYLE | ROUND | | TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE | | TERMINAL TYPE AND QUANTITY | 3 TURRET | | UNDERCUT DIAMETER | 0.875 INCHES NOMINAL | | UNDERCUT WIDTH | 0.0620 INCHES NOMINAL |
|
|