|
|
|
National Stock Number:
5905-01-510-3620
Federal Supply Class:
5905
National Item Identification Number:
015103620
Description:
RESISTOR,VARIABLE,NONWIRE WOUND,
Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus or minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.
|
Manufacturer Information:
| MIL-PRF-94/5 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | RV4SBYFD103C | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| ELECTRICAL RESISTANCE PER SECTION | 100.0 KILOHMS SINGLE SECTION | | ACTUATOR TYPE | SINGLE SHAFT | | BODY DIAMETER | 1.094 INCHES NOMINAL | | BODY LENGTH | 0.468 INCHES MINIMUM AND 0.750 INCHES MAXIMUM | | BODY STYLE | CYLINDRICAL BUSHING MOUNTED | | FIRST FLAT LENGTH | 0.250 INCHES NOMINAL | | FLAT HEIGHT | 0.211 INCHES MINIMUM AND 0.221 INCHES MAXIMUM | | MOUNTING BUSHING LENGTH | 0.360 INCHES MINIMUM AND 0.432 INCHES MAXIMUM | | MOUNTING METHOD | STANDARD BUSHING | | POWER DISSIPATION RATING PER SECTION IN WATTS | 1.0 FREE AIR SINGLE SECTION | | RELIABILITY INDICATOR | NOT ESTABLISHED | | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0 TO 10.0 SINGLE SECTION | | SCREW THREAD DIAMETER | 0.375 INCHES NOMINAL | | SCREW THREAD QUANTITY PER INCH | 32.0 | | SCREW THREAD SERIES DESIGNATOR | UNEF | | SECTION QUANTITY | 1 | | SHAFT DIAMETER | 0.248 INCHES MINIMUM AND 0.251 INCHES MAXIMUM | | SHAFT LENGTH | 0.762 INCHES MINIMUM AND 1.188 INCHES MAXIMUM | | SHAFT STYLE | ROUND, FLATTED | | TERMINAL LOCATION | REAR-BOTTOM | | TERMINAL TYPE AND QUANTITY | 3 TAB, SOLDER LUG |
|
|