| ADJUSTMENT DEVICE DRIVE TYPE AND QUANTITY | 1 SLOTTED SCREW |
| ADJUSTMENT DEVICE TORQUE | 2.500 INCH-OUNCES MINIMUM AND 10.000 INCH-OUNCES MAXIMUM |
| BODY STYLE | PLATE-MESHING |
| CAPACITANCE DRIFT IN PICOFARADS | 0.04 SINGLE SECTION |
| CAPACITANCE RANGE IN PICOFARADS | +1.5 TO 11.6 SINGLE SECTION |
| DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH | 0.291 INCHES MINIMUM AND 0.299 INCHES MAXIMUM |
| FRAGILITY FACTOR | MODERATELY RUGGED |
| INCLOSURE TYPE | UNINCLOSED |
| INSULATION DC RESISTANCE AT 25 DEG CELSIUS | 50000.0 MEGOHMS |
| OVERALL HEIGHT | 0.441 INCHES MINIMUM AND 0.465 INCHES MAXIMUM |
| OVERALL LENGTH | 0.719 INCHES MINIMUM AND 0.799 INCHES MAXIMUM |
| OVERALL WIDTH | 0.421 INCHES MINIMUM AND 0.445 INCHES MAXIMUM |
| MATERIAL | STEATITE BASE |
| MOUNTING FACILITY TYPE AND QUANTITY | 2 UNTHREADED HOLE |
| NONDERATED VOLTAGE RATING AND TYPE | 650.0 AC PEAK SINGLE SECTION |
| NONDERATED OPERATING TEMP | -55.0 CELSIUS MINIMUM AND 85.0 CELSIUS MAXIMUM |
| PLATE AIR GAP | 0.010 INCHES |
| PLATE QUANTITY | 10 |
| QUALITY FACTOR AT 25 DEG CELSIUS | 1500.0 |
| TEMP COEFFICIENT OF CAPACITANCE IN PPM PER DEG CELSIUS | 45.0 SINGLE SECTION |
| TERMINAL LOCATION | OPPOSITE SIDES ON ADJUSTMENT CONTROL END PERPENDICULAR |
| TERMINAL LENGTH | 0.324 INCHES MINIMUM AND 0.364 INCHES MAXIMUM |
| TERMINAL THICKNESS | 0.016 INCHES NOMINAL |
| TERMINAL TYPE AND QUANTITY | 2 TAB, SOLDER LUG |
| TOLERANCE OF TEMP COEFFICIENT IN PPM PER DEG CELSIUS | -15.0 TO 15.0 SINGLE SECTION |
| TUNING CHARACTERISTIC | STRAIGHT LINE CAPACITY SINGLE SECTION |
| UNTHREADED MOUNTING HOLE DIAMETER | 0.067 INCHES MINIMUM AND 0.075 INCHES MAXIMUM |