|
|
|
National Stock Number:
5910-00-350-2193
Federal Supply Class:
5910
National Item Identification Number:
003502193
Description:
CAPACITOR,FIXED,PLASTIC DIELECTR
Detail:
A capacitor whose capacitance value cannot be adjusted or varied, having a plastic, plastic film, plasticized (plastic impregnated) paper, or any combination of plastic and paper or plastic and paper films as the dielectric material. The plastic may be one or more types of synthetic compounds such as polyesters, polyfluorides, polycabonates, and the like. It may be a single unit, or consist of two or more fixed units which cannot be separated. For items whose electrodes consist of a metallic film deposited (metallized) on the dielectric material, see CAPACITOR, FIXED, METALLIZED, PAPER-PLASTIC DIELECTRIC.
|
Manufacturer Information:
| 046-001860 | 26916 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | 171017-0012 | 30184 | BUTLER NATIONAL CORP | | MPC830-47-100A | 19363 | COLONIAL PLASTICS MFG CO | | B171017-0012 | 30184 | BUTLER NATIONAL CORP |
|
Techincal Specification:
| BODY HEIGHT | 0.430 INCHES NOMINAL | | BODY LENGTH | 0.830 INCHES NOMINAL | | BODY STYLE | W/O MTG FACILITIES TERMINAL(S) ON ONE SURFACE | | BODY WIDTH | 0.730 INCHES NOMINAL | | CAPACITANCE VALUE PER SECTION | 0.470 MICROFARADS SINGLE SECTION | | CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH | 0.555 INCHES MINIMUM AND 0.655 INCHES MAXIMUM | | DIELECTRIC MATERIAL | PLASTIC POLYCARBONATE | | DISSIPATION FACTOR AT REFERENCE TEMP IN PERCENT | 0.7500 | | INSULATION RESISTANCE AT REFERENCE TEMP | 50000.0 MEGOHM-MICROFARADS | | MATERIAL | PLASTIC CASE | | NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION | 100.0 DC SINGLE SECTION | | NONDERATED OPERATING TEMP | -55.0 CELSIUS MINIMUM AND 125.0 CELSIUS MAXIMUM | | RELIABILITY INDICATOR | NOT ESTABLISHED | | SCHEMATIC DIAGRAM DESIGNATOR | NO COMMON OR GROUNDED ELECTRODE(S) | | TERMINAL DIAMETER | 0.032 INCHES NOMINAL | | TERMINAL LENGTH | 1.250 INCHES MINIMUM | | TERMINAL TYPE AND QUANTITY | 2 UNINSULATED WIRE LEAD | | TERMINAL SURFACE TREATMENT | SOLDER | | TOLERANCE RANGE PER SECTION | -1.00 TO 1.00 PERCENT SINGLE SECTION |
|
|