|
|
|
National Stock Number:
5910-00-369-6366
Federal Supply Class:
5910
National Item Identification Number:
003696366
Description:
CAPACITOR,FIXED,PAPER DIELECTRIC
Detail:
A capacitor whose capacitance value cannot be adjusted or varied, having paper as the dielectric material. It may be a single unit or consist of two or more fixed units which cannot be seperated. For items whose dielectric material consist of plasticized (plastic impregnated) paper or paper-plastic combinations, see CAPACITOR, FIXED, PLASTIC DIELECTRIC. For items whose electrodes consist of a metallic film deposited (metallized) on the dielectric material, see CAPACITOR, FIXED, METALIZED, PAPER-PLASTIC DIELECTRIC.
|
Manufacturer Information:
| 908-001 | 95542 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | 908-001-2104 | 0TCV9 | ARIZONA CAPACITORS, INC | | 908-001-2104 | 56289 | SPRAGUE ELECTRIC CO WORLD HQS | | 908-001-2104 | 95542 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | 908-001-2104 | 96733 | SFE TECHNOLOGIES |
|
Techincal Specification:
| BODY DIAMETER | 0.494 INCHES MAXIMUM | | BODY LENGTH | 1.000 INCHES MAXIMUM | | BODY STYLE | W/O MTG FACILITIES, AXIAL TERMINALS | | CAPACITANCE VALUE PER SECTION | 0.100 MICROFARADS SINGLE SECTION | | DISSIPATION FACTOR AT REFERENCE TEMP IN PERCENT | 1.0000 | | FEATURES PROVIDED | HERMETICALLY SEALED CASE | | INSULATION RESISTANCE AT MAXIMUM OPERATING TEMP | 10.0 MEGOHM-MICROFARADS | | INSULATION RESISTANCE AT REFERENCE TEMP | 18000.0 MEGOHMS | | NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION | 200.0 DC SINGLE SECTION | | NONDERATED OPERATING TEMP | -55.0 CELSIUS MINIMUM AND 85.0 CELSIUS MAXIMUM | | RELIABILITY INDICATOR | ESTABLISHED | | SCHEMATIC DIAGRAM DESIGNATOR | NO COMMON OR GROUNDED ELECTRODE(S) | | SPECIAL TEST FEATURES | BURN-IN | | TERMINAL LENGTH | 1.766 INCHES MAXIMUM | | TERMINAL TYPE AND QUANTITY | 2 UNINSULATED WIRE LEAD | | TERMINAL SURFACE TREATMENT | SOLDER | | TEST DATA DOCUMENT | 95542-908-001 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) | | TOLERANCE RANGE PER SECTION | -10.00 TO 10.00 PERCENT SINGLE SECTION |
|
|