|
|
|
National Stock Number:
5910-00-615-0105
Federal Supply Class:
5910
National Item Identification Number:
006150105
Description:
CAPACITOR,FIXED,CERAMIC DIELECTR
Detail:
A capacitor, whose capacitance value cannot be adjusted or varied, having a ceramic dielectric. It may be a single unit, or consist of two or more fixed units which cannot be separated.
|
Manufacturer Information:
| 281-0523-00 | 80009 | TEKTRONIX, INC. | | 301-000U2J0-101G | 59660 | TUSONIX, LLC | | 301-000U2M0101M | 59660 | TUSONIX, LLC | | 301-000V2M0101M | 72982 | ERIE SPECIALTY PRODUCTS INC | | 301000U3M0101M | 72982 | ERIE SPECIALTY PRODUCTS INC | | 301-000U2J0-101G | 72982 | ERIE SPECIALTY PRODUCTS INC | | 916-4058-00 | 13499 | ROCKWELL COLLINS, INC. | | 916-4058-000 | 13499 | ROCKWELL COLLINS, INC. | | 916-4986-000 | 13499 | ROCKWELL COLLINS, INC. | | 308-651U2J0-101G | 59660 | TUSONIX, LLC | | 308-651U2J0-101G | 72982 | ERIE SPECIALTY PRODUCTS INC | | CC30UJ101G | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | 416358-8 | 96214 | RAYTHEON COMPANY | | 5910006150105 | A00AM | E.C.A ETABLISSEMENT CENTRAL DESAPPROVISIONNEMENTS DES FORCES ARMEE | | MIL-C-20/7 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MILC20-7 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| BODY DIAMETER | 0.220 INCHES NOMINAL | | BODY LENGTH | 0.430 INCHES NOMINAL | | BODY STYLE | W/O MTG FACILITIES, RADIAL TERMINALS | | CAPACITANCE VALUE PER SECTION | 100.000 PICOFARADS SINGLE SECTION | | INSULATION RESISTANCE AT MAXIMUM OPERATING TEMP | 1000.0 MEGOHMS | | INSULATION RESISTANCE AT REFERENCE TEMP | 50000.0 MEGOHMS | | MATERIAL | CERAMIC CASE | | NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION | 500.0 DC SINGLE SECTION | | NONDERATED OPERATING TEMP | -55.0 CELSIUS MINIMUM AND 85.0 CELSIUS MAXIMUM | | RELIABILITY INDICATOR | NOT ESTABLISHED | | SCHEMATIC DIAGRAM DESIGNATOR | NO COMMON OR GROUNDED ELECTRODE(S) | | TEMP COEFFICIENT OF CAPACITANCE PER SECTION IN PPM PER DEG CELSIUS | -750.0 SINGLE SECTION | | TERMINAL LENGTH | 1.250 INCHES MINIMUM | | TERMINAL SURFACE TREATMENT | SOLDER | | TERMINAL TYPE AND QUANTITY | 2 UNINSULATED WIRE LEAD | | TEST DATA DOCUMENT | 81349-MILC20 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). AND 81349-MILC20/7 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). | | TOLERANCE OF TEMP COEFFICIENT PER SECTION IN PPM PER DEG CELSIUS | -120.0 TO 120.0 SINGLE SECTION | | TOLERANCE RANGE PER SECTION | -2.00 TO 2.00 PERCENT SINGLE SECTION |
|
|