| BODY HEIGHT | 0.090 INCHES MAXIMUM |
| BODY LENGTH | 0.130 INCHES MAXIMUM |
| BODY STYLE | W/O MTG FACILITIES, TERMINAL(S) ON ONE SURFACE |
| BODY WIDTH | 0.130 INCHES MAXIMUM |
| CAPACITANCE VALUE PER SECTION | 390.000 PICOFARADS SINGLE SECTION |
| CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH | 0.200 INCHES NOMINAL |
| DISSIPATION FACTOR AT REFERENCE TEMP IN PERCENT | 3.0000 |
| INSULATION RESISTANCE AT REFERENCE TEMP | 1000.0 MEGOHMS |
| MATERIAL | PLASTIC CASE |
| NONDERATED OPERATING TEMP | -55.0 CELSIUS MINIMUM AND 125.0 CELSIUS MAXIMUM |
| NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION | 300.0 DC SINGLE SECTION |
| RELIABILITY INDICATOR | NOT ESTABLISHED |
| SCHEMATIC DIAGRAM DESIGNATOR | NO COMMON OR GROUNDED ELECTRODE(S) |
| TEMP COEFFICIENT OF CAPACITANCE PER SECTION IN PPM PER DEG CELSIUS | 0.0 SINGLE SECTION |
| TERMINAL DIAMETER | 0.023 INCHES NOMINAL |
| TERMINAL LENGTH | 0.800 INCHES MINIMUM |
| TERMINAL SURFACE TREATMENT | SILVER |
| TERMINAL TYPE AND QUANTITY | 2 UNINSULATED WIRE LEAD |
| TEST DATA DOCUMENT | 02387-66A5A57/3 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| TOLERANCE RANGE PER SECTION | -5.00 TO 5.00 PERCENT SINGLE SECTION |
| TOLERANCE OF TEMP COEFFICIENT PER SECTION IN PPM PER DEG CELSIUS | -15.0 TO 5.0 SINGLE SECTION |