| BODY STYLE | PLATE-MESHING |
| INCLOSURE TYPE | UNINCLOSED |
| TUNING CHARACTERISTIC | STRAIGHT LINE CAPACITY SINGLE SECTION |
| ADJUSTMENT DEVICE DRIVE TYPE AND QUANTITY | 1 SHAFT |
| TERMINAL TYPE AND QUANTITY | 1 TAB, SOLDER LUG AND |
| 2 SOLDER STUD |
| CAPACITANCE RANGE IN PICOFARADS | 3.0 TO 10.0 SINGLE SECTION |
| NONDERATED VOLTAGE RATING AND TYPE | 600.0 DC CONTINUOUS SINGLE SECTION |
| NONDERATED OPERATING TEMP | -55.0 DEG CELSIUS MINIMUM AND |
| 85.0 DEG CELSIUS MAXIMUM |
| OVERALL LENGTH | 1.938 INCHES NOMINAL |
| OVERALL HEIGHT | 1.219 INCHES NOMINAL |
| OVERALL WIDTH | 0.938 INCHES NOMINAL |
| BODY LENGTH | 0.938 INCHES MAXIMUM |
| SHAFT TYPE | ROUND SINGLE SHAFT |
| SHAFT DIAMETER | 0.250 INCHES NOMINAL SINGLE SHAFT |
| SHAFT LENGTH | 1.000 INCHES NOMINAL SINGLE SHAFT |
| ADJUSTMENT DEVICE ROTATION | 180.0 DEGREES NOMINAL CLOCKWISE |
| ADJUSTMENT DEVICE TORQUE | 2.500 INCH-OUNCES MINIMUM AND |
| 10.000 INCH-OUNCES MAXIMUM |
| MOUNTING FACILITY TYPE AND QUANTITY | 2 THREADED HOLE |
| MOUNTING FACILITY SCREW THREAD SERIES DESIGNATOR | UNC |
| NOMINAL THREAD SIZE | 0.112 INCHES |
| UNTHREADED MOUNTING HOLE DIAMETER | 0.112 INCHES NOMINAL |
| DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH | 0.656 INCHES NOMINAL |
| TEST DATA DOCUMENT | 81349-MIL-C-92 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| QUALITY FACTOR AT 25 DEG CELSIUS | 1500.0 |
| SPEC/STD CONTROLLING DATA | |
| DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | CT14F010M |
| MANUFACTURERS CODE | 81349 |
| NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | MIL-C-92A |