5910-00-789-7507, CAPACITOR,FIXED,PLASTIC DIELECTR

National Stock Number:
5910-00-789-7507

Federal Supply Class:
5910

National Item Identification Number:
007897507

Description:
CAPACITOR,FIXED,PLASTIC DIELECTR

Detail:
A capacitor whose capacitance value cannot be adjusted or varied, having a plastic, plastic film, plasticized (plastic impregnated) paper, or any combination of plastic and paper or plastic and paper films as the dielectric material. The plastic may be one or more types of synthetic compounds such as polyesters, polyfluorides, polycabonates, and the like. It may be a single unit, or consist of two or more fixed units which cannot be separated. For items whose electrodes consist of a metallic film deposited (metallized) on the dielectric material, see CAPACITOR, FIXED, METALLIZED, PAPER-PLASTIC DIELECTRIC.

Manufacturer Information:

11031626-1	18876	U S ARMY AVIATION AND MISSILE COMMAND
601PE68305	84411	AMERICAN SHIZUKI CORP
601PE683050W3	33PE8	OUTSOURCE ELECTRONICS MANUFACTURING, INC.
601PE683050W3	84411	AMERICAN SHIZUKI CORP

Techincal Specification:

BODY HEIGHT	0.300 INCHES MAXIMUM
BODY LENGTH	0.531 INCHES MAXIMUM
BODY STYLE	W/O MTG FACILITIES TERMINAL(S) ON ONE SURFACE
BODY WIDTH	0.500 INCHES MAXIMUM
CAPACITANCE VALUE PER SECTION	0.068 MICROFARADS SINGLE SECTION
CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH	0.531 INCHES NOMINAL
DIELECTRIC MATERIAL	PLASTIC POLYETHYLENE TEREPHTHALATE
DISSIPATION FACTOR AT REFERENCE TEMP IN PERCENT	1.0000
INSULATION RESISTANCE AT MAXIMUM OPERATING TEMP	5000.0 MEGOHMS
INTERNAL ELECTRICAL CONNECTION TYPE	EXTENDED FOIL
INSULATION RESISTANCE AT REFERENCE TEMP	50000.0 MEGOHM-MICROFARADS
MATERIAL	PLASTIC CASE
NONDERATED OPERATING TEMP	-55.0 CELSIUS MINIMUM AND 85.0 CELSIUS MAXIMUM
NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION	50.0 DC SINGLE SECTION
RELIABILITY INDICATOR	NOT ESTABLISHED
SCHEMATIC DIAGRAM DESIGNATOR	NO COMMON OR GROUNDED ELECTRODE(S)
TERMINAL DIAMETER	0.032 INCHES NOMINAL
TERMINAL LENGTH	1.000 INCHES MINIMUM
TERMINAL SURFACE TREATMENT	SOLDER
TERMINAL TYPE AND QUANTITY	2 UNINSULATED WIRE LEAD
TOLERANCE RANGE PER SECTION	-20.00 TO 20.00 PERCENT SINGLE SECTION

Click here to Register for Free 30-day Trial