|
|
|
National Stock Number:
5910-00-822-8724
Federal Supply Class:
5910
National Item Identification Number:
008228724
Description:
CAPACITOR,FIXED,PAPER DIELECTRIC
Detail:
A capacitor whose capacitance value cannot be adjusted or varied, having paper as the dielectric material. It may be a single unit or consist of two or more fixed units which cannot be seperated. For items whose dielectric material consist of plasticized (plastic impregnated) paper or paper-plastic combinations, see CAPACITOR, FIXED, PLASTIC DIELECTRIC. For items whose electrodes consist of a metallic film deposited (metallized) on the dielectric material, see CAPACITOR, FIXED, METALIZED, PAPER-PLASTIC DIELECTRIC.
|
Manufacturer Information:
| CP29A3EH103K | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | CP29A3EH103K1 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MIL-C-25/2 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MILC25 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| BODY DIAMETER | 1.000 INCHES NOMINAL | | BODY HEIGHT | 1.000 INCHES NOMINAL | | BODY LENGTH | 1.125 INCHES NOMINAL | | BODY STYLE | W/MTG BRACKET, AXIAL TERMINALS | | BODY WIDTH | 1.000 INCHES NOMINAL | | CAPACITANCE VALUE PER SECTION | 10000.000 PICOFARADS SINGLE SECTION | | INSULATION RESISTANCE AT MAXIMUM OPERATING TEMP | 600.0 MEGOHMS | | INSULATION RESISTANCE AT REFERENCE TEMP | 6000.0 MEGOHMS | | MOUNTING FACILITY TYPE AND QUANTITY | 1 UNTHREADED MOUNTING HOLES | | NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION | 1500.0 DC SINGLE SECTION | | NONDERATED OPERATING TEMP | -55.0 CELSIUS MINIMUM AND 85.0 CELSIUS MAXIMUM | | RELIABILITY INDICATOR | NOT ESTABLISHED | | SCHEMATIC DIAGRAM DESIGNATOR | ELECTRODE(S) GROUNDED TO CASE, W/GND TERMINAL | | TERMINAL LENGTH | 1.500 INCHES MINIMUM | | TERMINAL SURFACE TREATMENT | SOLDER | | TERMINAL TYPE AND QUANTITY | 2 UNINSULATED WIRE LEAD | | TEST DATA DOCUMENT | 81349-MIL-C-25 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). | | TOLERANCE RANGE PER SECTION | -10.00 TO 10.00 PERCENT SINGLE SECTION | | UNTHREADED MOUNTING HOLE DIAMETER | 0.156 INCHES NOMINAL |
|
|